Installation Guide

12
12
14
13
15
Assembly (continued)
O
O
O
O
DD
N
M
CC
Attaching the base
Preparing the front cabinet rails
Preparing the side panels
Assembling the sides
Align the Bottom Shelf (A) with the center assembly.
Insert Screws (EE) through the Bottom Shelf (A) and
into the pre-drilled holes on the edges of the center
assembly as shown.
Securely tighten using a Phillips screwdriver.
Locate the two Cabinet Rails (O) and place on a at
surface.
Insert Cam Lock Screws (CC) into the pre-drilled
holes on both panels as shown and tighten using a
Phillips screwdriver.
Locate the Left Side Panel (M) and Right Side Panel (N)
and place on a at surface.
Insert Wood Dowels (BB) into the pre-drilled holes
as shown.
Align the previously installed wood dowels on the Left
and Right Side Panels (M, N) and cam lock screws on
the Cabinet Rails (O) with the pre-drilled holes as shown.
Push together. Secure the Cabinet Rails (O) onto each Side
Panel (M, N) by inserting Cam Lock Connectors (DD) into
the pre-drilled holes.
Use a Phillips screwdriver to tighten all Cam Lock
Connectors (DD).
A
M
N
EE
BB