Installation Guide

Locate the Back Panels (Q, R).

Insert the Screws (TT) through the pre-drilled holes in

the Upper Back Panel (R) and the Side Back Panels (Q).

Tighten using a Phillips Screwdriver.

Attaching the back panels

Preparing the doors

Locate the Euro Hinges (GG) and secure to the Cabinet

Doors (S) using Screws (HH) as indicated. Repeat for

both the upper and lower hinge.

Place a Door Bumper (II) on the upper and lower corner

of each door, opposite from the Euro Hinges (GG) as

shown. Simply peel off the adhesive stick and press the

bumper rmly against the door.

Assembly (continued)