Installation Guide

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Each Door Handle (MM) has pre-attached screws.

Remove these screws and place handles over the

pre-drilled holes in each Cabinet Door (S).

Place the pre-attached screws on the other side of the

Cabinet Door (S) and tighten with a Phillips screwdriver

through the door and into the handle.

Insert the Shelf Pins (AA) into the pre-drilled holes on

the inside of each cabinet side panel as shown. Align all

pins to the same height to ensure your shelf is level.

Rest the Adjustable Shelf (T) on the Shelf Pins (AA) at

your desired height.

Attach the previously installed Euro Hinges on the

Cabinet Doors (S) onto the support blocks within the

main assembly as shown.

Secure by tightening the pre-attached screws on the

hinges into the pre-drilled holes in the support blocks.

Attaching door handles

Inserting the adjustable shelves

Attaching the doors

Assembly (continued)