Installation Guide

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Operation

3 4

Adjusting the heater

Press the heater button on the control panel to turn on/off

(00) and adjust the heater setting by “ ”

buttons on the control panel.

The “+ / - ” buttons on the remote will increase / decrease

temperature setting.

The thermostat setting range is 62°F - 82°F ( 17°C - 27°C)

or continuously ON.

The thermostat is adjustable by 2°F or 1°C increments.

NOTE:

To change between °F and °C press and hold the

HEATER button on the control panel for 3 seconds.

Push the Power button to supply power to all

functions of the replace and put the insert in a

standby mode.

Push the Power button again to turn off all functions.

1 2

Powering the replace

NOTE:

Holding the Power button on the control panel for

10 seconds will disable the heater function.

NOTE:

All previous settings are held in memory, so the

next time you power up the replace, the unit will turn on

with the same settings.

Adjusting the ame

There are 5 unique Spectrare ame effects that can be

selected:

Spectrare

Sapphire

Amethyst

Camp-re

Midnight Fire

AU: Auto Cycle will seamlessly cycle through the above

ame colors.

OFF (00)

Pressing the Timer button will cycle through the timer

settings; 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, 7H,

8H, 9H and off (00).

Setting the timer

NOTE:

The control panel can be accessed at the upper-right corner of the insert.