Item #1001 398 952 Model #16650 USE AND CARE GUIDE 7-LIGHT PENDANT Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and co you have placed in Home Decorators Collection through the purchase of this light xture. We strive to continually create quality products designed to enhance your home.
Table of Contents Hardware Included ...................................................................3 Package Contents ....................................................................4 Installation ..................................................................... 5 Care and Cleaning ........................................................ 7 Troubleshooting ............................................................ 7 Service Parts .................................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before installing. To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard. IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-800-986-3460. NOTE: You may use seven 40 W type G9 xenon bulbs (included).
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity Part A B Canopy Wire clip 1 5 D E C Fixture body 1 F 4 Description 8 bead crystal strand 11 bead crystal strand 8 bead crystal strand with steel wire Quantity 20 15 15
Installation 1 Preparing the mounting bracket Fasten the mounting bracket (AA) onto the outlet box using two outlet box screws (FF). Screw the threaded tube (BB) into the mounting bracket (AA), and secure it using the lock washer (DD) and hex nut (EE). NOTE: The threaded tube (BB) should extend long enough to protrude through the canopy (A) when it is mounted. (Adjust as needed). 2 Adjusting the height of the fixture body Adjusting the steel wires length: 1.
Installation (continued) 3 Hanging the crystal strands to the fixture body Hook the 8 bead crystal strands (D) to the outmost circle of the fixture body (C) as shown. Hook the 11 bead crystal strands (E) to the next circle of the fixture body (C) as shown. Hook the 8 bead crystal strands with steel wire (F) to the remainder of the fixture body (C) as shown. NOTE: hanging the crystal strands. 4 Connecting the wires Strip 3/4 in. of insulation from wire ends.
Installation (continued) 5 Attaching the canopy to the outlet box 6 Place the canopy (A) over the outlet box and allow the threaded tube (BB) to come through the hole of the canopy (A). Tighten the finial (HH) to the protruding threaded tube (BB) on the mounting bracket (AA) until the canopy (A) is held firmly against the ceiling. Installing the light bulbs Install the light bulbs (II) into the sockets. Use seven 40 W G9 base xenon bulbs (included). NOTE: Use only Max 40W type G9 xenon bulbs.
Service Parts MODEL TYPE: 16650 Part Description AA BB DD EE FF Mounting bracket Threaded tube Green ground screw (Preassembled to round mounting bracket (AA)) Lock washer Hex nut Outlet box screw GG Wire connector F HH Finial CC Part Description II A 40 W G9 xenon bulb Canopy B Wire clip C D E Fixture body 8 bead crystal strand 11 bead crystal strand 8 bead crystal strand with steel wire 8
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Artículo #1001 398 952 Modelo #16650 GUÍA DE USO Y MANTENIMIENTO LAMPARA COLGANTE DE 7 LUCES ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS HOMEDEPOT.COM/HOMEDECORATORS GRACIAS POR TU COMPRA.
Índice Herramientas Necesarias.........................................................3 Aparillage Incluido ...................................................................3 Contenido del Paquete .............................................................4 Instalación ..................................................................... 5 Cuidado y Limpieza ...................................................... 7 Solucion de Problemas ................................................
Pre-Instalación PLANIFICION DE LA INSTALACIÓN Lea todas las instrucciones antes de comenzar la instalación. Para evitar dañar el producto, colócalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón NOTA: Este producto requiere siete bombillas de 40 W de tipo G9 xenon (incluidas). No toque las bombillas G9 xenon con las manos desnudas en ningún momento. Se le ha suministrado un par de guantes blancos para la instalación, ya que la grasa de piel puede dañar la bombilla.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE Pieza Descripción Cantidad Pieza A B Dosel Presilla de los cables 1 5 D E C Cuerpo de la lámpara 1 F 4 Descripción Lágrima de 8 cuentas de cristal Lágrima de 11cuentas de cristal Lágrima de 8 cuentas de cristal con cable de acero Cantidad 20 15 15
Instalación 1 Preparando la tira de montaje Asegure la tira de montaje (AA) en la caja eléctrica usando los tornillos de la caja eléctrica (FF). Enrosque el tubo roscado (BB) en la tira de montaje (AA), y asegurelo usando la arandela de seguridad (DD) y la tuerca hexagonal (EE). NOTA: El tubo roscado (BB) debe extenderse lo su ra sobresalir a través del dosel (A) cuando este este montado. (Ajustar según sea necesario). 2 Ajustando la altura de la lámpara Ajuste de la longitud de los cables de acero: 1.
Instalación (continuación) 3 Colgando las lágrimas decorativas de cristal Cuelgue las lágrimas de 8 cuentas de cristal (D) en el circulo mas cerca del extremo de afuera del cuerpo de la lámpara (C) como se muestra. Cuelgue las lágrimas de 11 cuentas de cristal (E) en el proximo circulo en el cuerpo de la lampara (C) como se muestra. Cuelgue las lágrimas de 8 cuentas de cristal con el cable de acero (F) en el area restante del cuerpo de la lámpara (D) como se muestra.
Instalación (continuación) 5 Adheriendo el dosel a la caja eléctrica 6 Coloque el dosel (A) sobre la caja eléctrica permitiendo que el tubo roscado (BB) el dosel (A). Apriete el remate (HH) al tubo roscado (BB) que sobresale por la tira de montaje (AA) hasta que el dosel (A) este rmemente sostenido en el techo. Instalación de las bombillas Instale las bombillas (II) en los receptáculos. Use siete bombillas de 40 W G9 xenon. (incluidas) NOTA: Use solamente bombillas de 40 W de tipo G9 xenon como máximo.
Piezas de remplazo MODELO: 16650 Pieza Descripción Pieza Descripción AA Tira de montaje II BB A B Presilla de los cables DD EE FF Tubo roscado Tornillo verde a tierra (Preinstalado al soporte de montaje (AA)) Arandela de seguridad Tuerca hexagonal Tornillo de la caja eléctrica Bombillas de 40 W de tipo G9 xenon Dosel C D E GG Conector de cables F Cuerpo de la lámpara Lágrima de 8 cuentas de cristal Lágrima de 11cuentas de crista Lágrima de 8 cuentas de cristal con cable de acero HH Remat
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Conserva este manual para referencias futuras.