Item #1000 000 000 Model #16653 USE AND CARE GUIDE 5-LIGHT FLUSH MOUNT Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this light fixture.
Table of Contents Hardware Included ...................................................................3 Package Contents ....................................................................4 Installation ..................................................................... 5 Care and Cleaning ........................................................ 7 Troubleshooting ............................................................ 7 Service Parts .................................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before installing. To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard. IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-800-986-3460. NOTE: You may use five 40 W type G9 xenon bulbs (included).
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity Part Description Quantity A Fixture body 1 B Glass plate 1 4
Installation 1 Installing the mounting bracket □ Fasten the mounting bracket (AA) onto the outlet box using two outlet box screws (FF). 2 Connecting the wires □ □ □ □ Strip 3/4 in. of insulation from wire ends. Connect the black live wire from the fixture body (A) to the black wire from the outlet box and the white neutral wire from the fixture body (A) to the white wire from the outlet box. Twist the stripped ends together with pliers.
Installation (continued) 3 □ 4 □ Attaching the fixture body to the outlet box Place the fixture body (A) over the outlet box, let the support screws (BB) come through the hole of the fixture body (A), then tighten the cap nuts (EE) to the protruding support screws (BB) on mounting bracket (AA) until the fixture body (A) is held firmly against the ceiling. 5 Installing the light bulbs Install the light bulbs (JJ) (included) into the sockets. Use five 40 W G9 base xenon bulbs.
Care and Cleaning □ Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully. □ To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box. Use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture. Troubleshooting Problem Possible Cause Solution The lights will not turn on. The bulb is burned out. Replace the light bulb. The power is off.
Service Parts MODEL: 16653 Part AA BB CC DD EE FF Description Part Description Mounting bracket Support screw (Preassembled to mounting bracket (AA)) Green ground screw Preassembled to mounting bracket (AA)) Hex nut (Preassembled to mounting bracket (AA)) Cap nut Outlet box screw GG Wire connector HH Plastic washer II Finial JJ 40 W G9 xenon bulb A B Fixture body Glass plate 8
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Artículo #1000 000 000 Modelo #16653 GUÍA DE USO Y MANTENIMIENTO LAMPARA DE MONTAJE EMPOTRADO DE 5 LUCES ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS GRACIAS POR TU COMPRA.
Índice Herramientas Necesarias.........................................................3 Aparillage Incluido ...................................................................3 Contenido del Paquete .............................................................4 Instalación ..................................................................... 5 Cuidado y Limpieza ...................................................... 7 Solucion de Problemas ................................................
Pre-Instalación PLANIFICION DE LA INSTALACIÓN Lea todas las instrucciones antes de comenzar la instalación. Para evitar dañar el producto, colócalo sobre una super suave, no abrasiva, como por ejemplo una alfombra o cartón NOTA: Este producto requiere cinco bombillas de 40 W de tipo G9 xenon (incluidas). No toque las bombillas G9 xenon con las manos desnudas en ningún momento. Se le ha suministrado un par de guantes blancos para la instalación, ya que la grasa de piel puede dañar la bombilla.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE Pieza A Descripción Cuerpo de la lámpara Cantidad Pieza 1 B 4 Descripción Plato de vidrio Cantidad 1
Instalación 1 Instalación de la tira de montaje Asegure la tira de montaje (AA) en la caja eléctrica usando los tornillos de la caja eléctrica (FF). 2 Realizar la conexión eléctrica Pelar el aislamiento del extremo de los cables 3/4 pulgadas. Conecte el cable negro de la lámpara (A) al cable negro de la caja eléctrica y el cable blanco de la lámpara (A) al cable blanco de la caja eléctrica. Junte y tuerza los extremos desnudos de los cables con el alicate.
Instalación (continuación) 3 4 Instalación del cuerpo de la lámpara a la caja eléctrica Coloque el cuerpo de la lámpara (A) sobre la caja eléctrica, deje que el tubo roscado (BB) atraviese el orificio del cuerpo de la lámpara (A), luego apriete las tuercas ciegas (EE) en el tubo roscado (BB) a la tira de montaje (AA) hasta que el cuerpo de la lámpara (A) quede firmemente asegurado contra el techo. 5 Instalación de las bombillas Instale las bombillas (JJ) (incluidas) en los receptáculos.
Mantenimiento y Limpieza No use limpiadores con químicos, solventes ni productos abrasivos. Use sólo un paño suave y seco para desempolvar o limpiar con cuidado. Para limpiar la lámpara, primero corta el suministro de electricidad, apagando el interruptor automatico o retirando el fusible correspondiente en la caja de fusibles. Seguidamente, usa un paño limpio, seco o ligeramente húmedo (usa sólo agua limpia, nunca un solvente) para limpiar el exterior de la lámpara.
Piezas de remplazo MODELO: 16653 Pieza AA BB CC DD EE FF Descripción Tira de montaje Tornillo de soporte (Preensamblado a la tira de montaje (AA)) Tornillo verde a tierra (Preensamblado a la tira de montaje (AA)) Tuerca hexagonal (Pre-ensamblado a la tira de montaje (AA)) Tuerca ciega Tornillo de la caja eléctrica Pieza Descripción GG Conector de cables HH Arandela de plastico II Remate JJ A B 8 Bombillas de 40 W de tipo G9 xenon Cuerpo de la lámpara Plato de vidrio
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Conserva este manual para referencias futuras.