Item #1000 000 000 Model #16655 USE AND CARE GUIDE 6-LIGHT PENDANT Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this light fixture.
Table of Contents Hardware Included ...................................................................3 Package Contents ....................................................................4 Installation ..................................................................... 5 Care and Cleaning ........................................................ 7 Troubleshooting ............................................................ 7 Service Parts .................................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before installing. To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard. IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-800-986-3460. NOTE: You may use six 40 W type G9 xenon bulbs (included).
Pre-Installation (continued) PACKAGE CONTENTS Part A B Description Canopy Wire clip Quantity Part Description Quantity 1 5 C D Fixture body Glass plate 1 1 4
Installation 1 □ □ Preparing the mounting bracket Fasten the mounting bracket (AA) onto the outlet box using two outlet box screws (FF). Screw the threaded tube (BB) into the mounting bracket (AA), and secure it using the lock washer (DD) and hex nut (EE). NOTE: The threaded tube (BB) should extend long enough to protrude through the canopy (A) when it is mounted. (Adjust as needed).
Installation (continued) 3 □ □ □ □ Connecting the wires Strip 3/4 in. of insulation from wire ends. Connect the black live wire from the canopy (A) to the black wire from the outlet box and the white neutral wire from the canopy (A) to the white wire from the outlet box. Twist the stripped ends together with pliers.
Installation (continued) Assembling the glass plate to the fixture body 6 □ Place the glass plate (D) and plastic washer (JJ) over the tube onto the bottom of the fixture body (C), then secure with the cap nut (KK). Care and Cleaning □ Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully. □ To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
Service Parts MODEL TYPE: 16655 Part Description AA BB Mounting bracket Threaded tube Green ground screw (Preassembled to mounting bracket (AA)) Lock washer Hex nut Outlet box screw Wire connector Finial CC DD EE FF GG HH Part Description II JJ 40 W G9 xenon bulb Plastic washer KK Cap nut A B C D Canopy Wire clip Fixture body Glass plate 8
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Artículo #1000 000 000 Modelo #16655 GUÍA DE USO Y MANTENIMIENTO LAMPARA COLGANTE DE 6 LUCES ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS GRACIAS POR TU COMPRA. Apreciamos la confianza que has depositado en Hampton Bay al comprar esta lámpara de araña.
Índice Herramientas Necesarias.........................................................3 Aparillage Incluido ...................................................................3 Contenido del Paquete .............................................................4 Instalación ..................................................................... 5 Cuidado y Limpieza ...................................................... 7 Solucion de Problemas ................................................
Pre-Instalación PLANIFICION DE LA INSTALACIÓN Lea todas las instrucciones antes de comenzar la instalación. Para evitar dañar el producto, colócalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. NOTA: Este producto requiere seis bombillas de 40 W de tipo G9 xenon (incluidas). No toque las bombillas G9 xenon con las manos desnudas en ningún momento. Se le ha suministrado un par de guantes blancos para la instalación, ya que la grasa de piel puede dañar la bombilla.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE Pieza A B Descripción Dosel Presilla de los cables Cantidad Pieza 1 5 C D 4 Descripción Cuerpo de la lámpara Plato de vidrio Cantidad 1 1
Instalación 1 □ □ Preparando la tira de montaje Asegure la tira de montaje (AA) en la caja eléctrica usando los tornillos de la caja eléctrica (FF). Enrosque el tubo roscado (BB) en la tira de montaje (AA), y asegurelo usando la arandela de seguridad (DD) y la tuerca hexagonal (EE). NOTA: El tubo roscado (BB) debe extenderse lo suficiente para sobresalir a través del dosel (A) cuando este este montado. (Ajustar según sea necesario).
Instalación (continuación) 3 □ □ □ □ Realizar la conexión eléctrica Pelar el aislamiento del extremo de los cables 3/4 pulgadas. Conecte el cable negro vivo del dosel (A) al cable negro de la caja eléctrica y el cable blanco neutral del dosel(A) al cable blanco de la caja eléctrica. Junte y tuerza los extremos desnudos de los cables con el alicate.
Instalación (continuación) 6 □ Adjuntando el plato de vidrio al cuerpo de la lámpara Coloque el plato de vidrio (D) y la arandela de plastico (JJ) sobre el tubo de abajo del cuerpo de la lámpara (C), luego asegurelo con las tuercas de tapa (KK). Mantenimiento y Limpieza □ No use limpiadores con químicos, solventes ni productos abrasivos. Use sólo un paño suave y seco para desempolvar o limpiar con cuidado.
Piezas de remplazo MODELO: 16655 Pieza Descripción Pieza Descripción AA Tira de montaje II BB Tubo roscado Tornillo verde a tierra (Preinstalado al soporte de montaje (AA)) Arandela de seguridad Tuerca hexagonal Tornillo de la caja eléctrica Conector de cables Remate JJ Bombillas de 40 W de tipo G9 xenon Arandela de plastico KK Tuerca de tapa A B C D Dosel Presilla de los cables Cuerpo de la lámpara Plato de vidrio CC DD EE FF GG HH 8
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Conserva este manual para referencias futuras.