Instructions / Assembly

Installation (continued)



Install the light bulb (not included) into the xture body (A)

socket. Use one 100-watt medium base bulb or less.

NOTE: You can also use one 23W maximum medium base (E26)

SBCFL (sold separately). Do not exceed the recommended wattage.

Place the rubber washers (HH) over the support

screws (long) (BB), and tighten the cap nuts (GG) onto the

support screws (long) (BB) until the xture body is held

rmly against the wall.

Installing the light bulb

Installing the xture body to

the outlet box

Place the xture body (A) over the outlet box, and ensure

the heads of the support screws (long) (BB) come through

the holes of the xture body (A).



Applying the caulk

Use weather resistant caulk (sold separately) to seal around

the top and side perimeter of the back plate of the xture

body (A). Do not caulk the bottom of the back plate to allow

for condensation evaporation.