Item # 1002 113 323 Model # 17017 USE AND CARE GUIDE 3-LIGHT VANITY Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m. Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this light fixture.
Table of Contents Hardware Included ...................................................................3 Package Contents ....................................................................4 Installation ..................................................................... 5 Care and Cleaning ........................................................ 7 Troubleshooting ............................................................ 7 Service Parts .................................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before installing. To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard. IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-800-986-3460. NOTE: You may use three 25 W type G9 xenon bulbs (included).
Pre-Installation (continued) PACKAGE CONTENTS Part A B C Description Mounting bracket Fixture body Glass shade Quantity Part 1 1 3 D E 4 Description Inner shade Small inner shade Quantity 3 3
Installation 1 Removing the mounting bracket 2 Installing the mounting bracket Unscrew the two support screws (AA) from the fixture body (B). Remove the mounting bracket (A) from the fixture body (B). Set the screws (AA) aside for later use. Fasten the mounting bracket (A) onto the outlet box using two outlet box screws (CC). 3 Connecting the wires Strip 3/4 in. of insulation from wire ends.
Installation (continued) 4 Attaching the canopy to the outlet box Place the fixture body (B) against the outlet box, align the two holes of the mounting bracket (A) and fixture body (B), then tighten the support screws (AA). 5 Installing the glass shade and light bulbs Install the light bulbs (EE) (included) into the sockets. Use three 25 W G9 base xenon bulbs. Position the glass shade (C) and inner shade (D) onto the socket, then secure with the inner small shade (E).
Care and Cleaning Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully. To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture. Troubleshooting Problem Possible Cause Solution The lights will not turn on. The bulb is burned out. Replace the light bulb. The power is off.
Service Parts MODEL: 17017 Part AA BB CC DD EE Description Part Support screw (short) (Preassembled to mounting bracket (A)) Green ground screw (Preassembled to mounting bracket (A)) Outlet box screw (long) Wire connector 40 W G9 xenon bulb 8 Description A Mounting bracket B Fixture body C D E Glass shade Inner shade Small inner shade
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m. Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Artículo # 1002 113 323 Modelo # 17017 GUÍA DE USO Y MANTENIMIENTO LÁMPARA DE TOCADOR DE 3 LUCES ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.
Índice Aparillage Incluido ...................................................................3 Contenido del Paquete .............................................................4 Instalación ..................................................................... 5 Cuidado y Limpieza ...................................................... 7 Solución de Problemas ................................................ 7 Partes de Servicio ......................................................... 8 Modelo ............
Pre-Instalación PLANIFICACIÓN DE LA INSTALACIÓN Lea todas las instrucciones antes de comenzar la instalación. Para evitar dañar el producto, colócalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. IMPORTANTE : Revisa que el aislamiento de los cables no haya sufrido ningún corte, abrasión ni tenga filamentos de cobre expuestos debidos al envío. Si hay un defecto en el cable suspenda el ensamblaje. Por favor llama a nuestro Equipo de Servicio al Cliente al 1-800-986-3460.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE Pieza A B C Descripción Soporte de montaje Cuerpo de la lámpara Campana de vidrio Cantidad Pieza 1 1 3 D E 4 Descripción Campana interior Campana interior pequeña Cantidad 3 3
Instalación 1 Retirando el soporte de montaje 2 Instalando el soporte de montaje Desenrosque los dos tornillos de soporte (AA) del cuerpo de la lámpara (B). Retire el soporte de montaje (A) del cuerpo de la lámpara (B). Coloque los tornillos (AA) a un lado para ser usados mas tarde. Fije el soporte de montaje (A) a la caja eléctrica usando los dos tornillos de la caja de salida (cortos) (CC). 3 Connexión de los cables Pelar el aislamiento del extremo de los cables 3/4 pulgada.
Instalación (continuación) 4 5 Adjuntando el dosel a la caja eléctrica Coloque el cuerpo de la lámpara (B) contra la caja de salida, alinee los dos orificios del soporte de montaje (A) y el cuerpo de la lámpara (B) y apriete los dos tornillos de soporte (AA). Instalación de las campanas de vidrio y los focos Instale los focos (EE) (incluidos) en los enchufes. Use tres focos de 25 W G9 de base xenon.
Mantenimiento y Limpieza No use limpiadores con químicos, solventes ni productos abrasivos. Use sólo un paño suave y seco para desempolvar o limpiar con cuidado. Para limpiar la lámpara, primero corta el suministro de electricidad, apagando el interruptor automático o retirando el fusible correspondiente en la caja de fusibles. Seguidamente, usa un paño limpio, seco o ligeramente húmedo (usa sólo agua limpia, nunca un solvente) para limpiar el exterior de la lámpara.
Piezas de remplazo MODELO: 17017 Pieza AA BB CC DD EE Descripción Pieza Tornillo de soporte (corto) (Preinstalado al soporte de montaje (A)) Tornillo verde a tierra (Preinstalado al soporte de montaje (A)) Tornillo de la caja de salida (largo) Conector de cables Foco de 25 W de tipo G9 xenon 8 Descripción A Soporte de montaje B Cuerpo de la lámpara C Campana de vidrio D E Campana interior Campana interior pequeña
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Conserva este manual para referencias futuras.