Instructions / Assembly

ssssssssssssss
1. Insert and thread socket assembly (B) into
lamp assembly (A) until secure.
2. Gently pull additional cord from lamp
assembly (A).
3. Remove the finial (E) from the harp (C).
4. Pinch and insert harp (C) into the harp fittings
on socket assembly (B). Slide the caps on
harp (C) over the fittings on socket assembly
(B) to secure.
5. Install the bulb. Use only the recommended
bulb types and wattages.
6. Place the shade (D) on harp (C) and secure
with finial (E).
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is
wider than the other). As a safety feature, this plug will
fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Never use with
an extension cord unless plug can be fully inserted.
Do not alter the plug.
CAUTION: Refer to the re-lamping label located near
the lamp holder for recommended maximum wattage.
Do not exceed recommended wattage.
WARNING: Do not attempt to replace the bulb while
the lamp is plugged into a wall receptacle.
Read & Save
Assembly Instructions
TROUBLE SHOOTING
1. If your lamp does not light, make sure the
plug is fully inserted into the outlet and try the
on /off switch again.
2. If the lamp still does not light, unplug and
replace the bulb.
3. If you have any questions regarding this
product please call,
Toll Free: 1.877.537.8539.
SKU # 0853400910