Item #1002 316 407 Model #51708 ETL Model #60-KBR USE AND CARE GUIDE ZOLMAN PIKE 60-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS To view an instructional video on how to install this product: 1. Go to www.homedepot.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 13 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser.
Pre-Installation (continued) TOOLS REQUIRED Phillips screwdriver Flat blade screwdriver Adjustable wrench Step ladder HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS F A G B H C D I 2H 4H 8H E Part Description J Quantity A Slide-on mounting bracket (inside canopy) 1 B Ball/downrod assembly C D Part Description Quantity E Fan-motor assembly 1 F Blade 8 1 G Light kit pan 1 Canopy with canopy ring attached 1 H Light kit fitter assembly (LED included) 1 Decorative motor collar cover 1 I Glass bowl 1 J Remote control (batteries included) 1 IMPORTANT: This product and/or components are
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. (15.9 Kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly - Standard Ceiling Mount 1 2 Preparing for mounting □□ Remove the canopy bottom cover (DD) from the canopy □□ (C) by turning the bottom cover counterclockwise until it unlocks. Loosen the two canopy screws (CC) located in the bottom of the mounting bracket (A), and turn the canopy counterclockwise to remove the mounting bracket (A) from canopy (C).
Assembly - Hanging the Fan 1 2 Attaching the fan to the electrical box WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. 15.9 kg) or less”, and use screws provided with the outlet box. □□ Carefully lift the fan-motor assembly (E) up to the slide-on □□ NOTE: The mounting bracket (A) is designed to slide into place on an outlet box with the outlet box screws (HH) installed.
Assembly - Hanging the Fan (continued) 3 Making the electrical connection WARNING: Each wire nut supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use. Outlet box in the ceiling II IMPORTANT: Use the plastic wire connectors (BB) supplied with your fan.
Assembly - Hanging the Fan (continued) 4 5 Wrapping the extra wire Mounting the fan-motor assembly (standard mount) WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball. Failure to properly seat the tab in the groove could cause damage to the wiring. NOTE: Follow this step ONLY if you did not cut the extra length off from the wires coming from the ceiling fan.
Assembly - Hanging the Fan (continued) 6 Attaching the fan blades E □□ Attach a blade (F) to the fan-motor assembly (E) by inserting □□ □□ the blade (F) into the slots in the side of the fan motor housing and aligning the three screw holes in the blade (F) with the holes in the center flywheel and secure with screws (AA). Make sure all the screws are firmly tightened. Repeat these steps for the remaining blades.
Assembly - Attaching the Accessories 2 Attaching the light kit fitter assembly □□ Remove one screw (LL) from the light kit pan, and loosen, but □□ □□ □□ □□ do not remove the other two screws. Connect the wires from the light kit fitter assembly (H) to the wires from the fan motor assembly (G) by connecting the molded adaptor plugs together. Carefully tuck all wires and splices into the switch cup.
Preparing the Remote Control Pairing the Remote Control NOTE: The remote control has already been paired to the ceiling fan for your convenience. If you have two of the same model fans in your home, please follow the steps below to control each fan independently. will begin to spin. LEARN 0 1 □□ If pairing is successful, the fan’s light kit will flash and the blades APRENDER ENCENDIDO 0 1 compartment within 30 seconds. REGULADOR □□ Return power to the fan at the wall switch or breaker box.
Operating Your Fan and Remote Control 1. Fan button. - Press and release the or off. button to turn the fan on □□ Fan on. The fan memory function will resume the speed set on the fan prior to the power being turned off. The LED bar will display the current settings for 5 seconds after the button is released. □□ Fan off. The fan memory function will store the current setting for the next time the fan is in use.
Operating Your Fan and Remote Control 4. Timer □□ Pressing the timer button will automatically turn fan and light (if light is on) off after 2, 4, or 8 hours. When you activate the timer mode, the LED to the left of the time above the clock will illuminate. Off 2H 4H 8H Disables timer 5. Fan reverse button (Must be pushed when the fan is in operation) □□ Warm weather: LED bar will illuminate and the lights will flow from high to low.
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.