Instructions / Assembly

11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Attaching the fan blades
6
□ Attach a blade (F) to the fan-motor assembly (E) by
inserting the blade (F) into the slots in the side of the fan
motor housing and aligning the three screw holes in the
blade (F) with the holes in the center ywheel and secure
with screws (AA).
□ Make sure all the screws are rmly tightened.
□ Repeat these steps for the remaining blades.
Assembly - Hanging the Fan (continued)
AA
E
F
Assembly - Attaching the Accessories
Attaching the light kit tter assembly
1
□ Remove one screw (LL) from the black bracket below the fan motor
assembly (E), and loosen, but do not remove the other two screws.
□ Connect the wires from the light kit tter assembly (G) to the wires
from the fan motor assembly (E) by connecting the molded adaptor
plugs together. Carefully tuck all wires and splices into the switch
cup.
□ Push the light kit tter assembly (G) up to the fan motor assembly
(E) so that the two loosened screw heads t into the keyhole slots.
Turn the light kit tter assembly (G) clockwise to secure.
□ Re-install the screw that was removed in the rst step.
□ Make sure all the screws are rmly tightened.
Installing the shade
2
□ Screw off the socket cover (JJ) from the socket of the light kit
tter assembly (G) and save it for later use.
□ Place the glass bowl (I) into the light kit tter assembly (G)
over the socket, and then screw the socket cover (JJ) into the
socket to secure the glass bowl (I) properly.
□ With power off, install the light bulbs (H) by screwing into the
light bulb socket.
WARNING: Do not overtighten when installing the shade into the
light kit. Allow the shade to cool completely before removing.
G
E
LL
JJ
I
H
E
G
CAUTION: To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing the light kit.