Full Product Manual

ManualsBrandsHome Decorators Collection ManualsCeiling FansAckerly 52 in. Integrated LED Bronze Ceiling Fan with Light Kit Works, Google Assistant and Alexa

- Comfort Breeze

Press and release the button to enable Comfort Breeze

; this will

change your fan speed randomly, simulating a relaxing breeze. To cancel

this feature press or .

Installation

INSTALLATION AND OPERATION

CEILING FAN REMOTE CONTROL

Safety Information

Warranty

CAUTION: Incorrect wire

connections will damage this

receiver.

The supplier warrants the remote control and receiver to be free from defects in

workmanship and material present at time of shipment from the factory for a period

of one year after the date of purchase by the original purchaser. We agree to correct

such defects without charge or at our option replace with a comparable or superior

model if the product is returned. To obtain warranty service, you must present a

copy of the receipt as proof of purchase. All costs of removing and reinstalling the

product are your responsibility. Damage to any part such as by accident or misuse or

improper installation or by afxing any accessories, is not covered by this warranty.

Servicing performed by unauthorized persons shall render the warranty invalid. There

is no other express warranty. Home Depot hereby disclaims any and all warranties,

including but not limited to those of merchantability and tness for a particular

purpose to the extent permitted by law. The duration of any implied warranty which

cannot be disclaimed is limited to the time period as specied in the express warranty.

Some states do not allow a limitation on how long an implied warranty lasts, so the

above limitation may not apply to you. The retailer shall not be liable for incidental,

consequential, or special damages arising out of or in connection with product use

or performance except as may otherwise be accorded by law. Some states do not

allow the exclusion of incidental or consequential damages, so the above exclusion

or limitation may not apply to you. This warranty gives specic legal rights, and you

may also have other rights which vary from state to state. This warranty supersedes

all prior warranties. Shipping costs for any return of product as part of a claim on the

warranty must be paid by the customer.

Contact the Customer Service Team at 1-800-330-3267

Pre-Installation

TOOLS REQUIRED

Step

ladder

Part Description Quantity

A Remote control 1

B Receiver 1

C AAA 1.5V battery 2

D Plastic wire

connector

E Mounting screw 2

F Rubber isolated pad 2

G Wall bracket 1

PACKAGE CONTENTS

IMPORTANT: This product

and/or components

are governed by one or

more of the following

U.S. Patents: 5,947,436;

5,988,580; 6,010,110;

6,046,416, 6,210,117 and

other patents pending.

NOTE: The remote control

has already been paired

at factory for your

convenience. If installing

two or more remote

controls in your home,

please follow the steps

below to control each fan

independently.

Pairing the remote control

Operating Fan with the BOND App

1. YOU MUST SET CEILING FAN TO HIGH

SPEED AND LIGHT KIT (IF ANY) TO

THE ON POSITION USING THE PULL

CHAINS (IF APPLICABLE) BEFORE

OPERATING REMOTE CONTROL.

• Remove the battery cover by

pressing firmly on the arrow

and sliding the cover off.

• Install two 1.5V AAA batteries.

• Slide the dip switch in the

battery compartment to the “1”

setting.

• Turn the electrical power to

the fan off then back on at the

breaker box or the wall switch.

• Press and release the “Learn”

button located in the remote’s

battery compartment within

30 seconds of turning the

electrical power to the fan on.

• If pairing is successful, the

fan’s light kit will flash, the

blades will begin to spin and

the fan and light kit will turn

off within 30 seconds.

Operating the remote control

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

Any changes or modications not expressly approved by the grantee of this device

could void the user’s authority to operate the equipment.

FCC ID: KUJCE10723

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Press and release the

button to turn the light on or off.

Press - to decrease the desired light level.

Press + to increase the desired light level.

Downloading the BOND HOME App

• Using your smart device, navigate to the application store (Apple App Store

or Google Play). Download the free BOND Home app and create an account.

Connecting to the BOND Receiver

• Ensure the fan and receiver are receiving power from the house supply by

using the remote control to turn the fan and light on and off.

• Open the BOND Home app on your smart device and follow the instructions

included in the app to add your fan.

Questions, problems, missing parts? Before returning to the store, call

Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m.,

EST Saturday

1-800-330-3267

We appreciate the trust and condence you have placed in us through the

purchase of this remote control. We strive to continually create quality

products designed to enhance your home.

Thank you!

Item #311264804

Model #99434

- Press and release the button to turn the fan on or off.

- Low speed.

- Medium-low speed.

- Medium-high speed.

- High speed.

- Timer

- While the fan is on press button once - turns on a 1 hour run timer.

- While the fan is on press button twice - turns on a 3 hour run timer.

- While the fan is on press button three times - turns on a 6 hour run timer.

- While the fan is on press button four times - cancel the delay feature.

- Light ON/OFF

CAUTION: To reduce the risk of re

or injury, do not use this product

in conjunction with any variable

(rheostat) wall control.

NOTE: The battery will weaken

with age and should be replaced

before leaking takes place as

this will damage the hand unit.

Dispose of the used battery

properly, keep the battery out of

the reach of children.

WARNING: To avoid possible

electrical shock, turn the

electricity off at the main fuse box

before wiring. If you feel you do

not have enough electrical wiring

experience, contact a licensed

electrician.

NOTE: Conrm that your

smart device (phone/tablet) is

connected to your WiFi network

before proceeding.

Installing the receiver

WARNING: To reduce the

risk of re or electric shock,

remember to disconnect power.

The electrical wiring must meet

all local and national electrical

code requirements. The

electrical source and fan must

be 110/120 volt, 60Hz. Do not

use this product in conjunction

with any variable wall control.

Incorrect wire connection can

damage this receiver.

CAUTION: If fan or house wires

are a different color, have this

unit installed by a licensed

electrician.

CAUTION: Do not install in a

damp location or immerse in

water (for indoor use only). Do

not pull on or cut leads shorter.

Do not drop or bump the unit.

Installation (continued)

NOTE: You must set ceiling fan

to high speed and light kit (if

any) to the on position using

the pull chains (if applicable)

before operating remote

control.

NOTE: For better performance

with the WIFI system, the WIFI

antenna must be mounted to

the ceiling outside of the fan’s

ceiling canopy.

• Position the house supply wires

(AAA) to one side of the slide-on

mounting bracket; position the

fan wires (BBB) to the opposite

side.

• Insert the narrow end of the

receiver (as shown, flat side

towards the ceiling) into the

slide-on mounting bracket

until it rests on top of the ball/

downrod assembly. The canopy

comes up to cover the receiver

and bracket.

Installing the rubber

isolated pads

• Loosen the two screws

provided with the outlet box;

insert two rubber isolated

pads (F) between the mounting

bracket and the outlet box;

firmly tightened the two

screws.

Installation (continued)

Wiring the receiver to the household wiring

IMPORTANT: Use the wire

connecting nuts (AA) supplied

with your fan. Secure the

connectors with electrical

tape and ensure there are no

loose strands or connections.

WARNING: Each wire nut

supplied with this fan is

designed to accept up to

one 12-gauge house wire

and two wires from the

fan. If you have larger than

12-gauge house wiring or

more than one house wire

to connect to the fan wiring,

consult an electrician for the

proper size wire nuts to use.

• Spread the wires apart so that

the green and white wires are on

one side of the outlet box and the

black wire is on the other side.

• Connect the green fan wires to

the household ground wire (this

may be a green or bare wire)

using a wire connecting nut (AA).

• Connect the receiver black (or

red) wire to the household black

(hot) wire using a wire connecting

nut (AA).

• Connect the receiver white

wire to the household white

wire (neutral) wire using a wire

connecting nut (AA).

• Secure each wire connecting nut

using electrical tape.

WARNING: To avoid possible

electrical shock, turn the

electricity off at the main

fuse box before wiring. If you

feel you do not have enough

electrical wiring knowledge

or experience, contact a

licensed electrician.

Wiring the fan to the receiver

• Connect the fan motor white wire

to the receiver white wire using a

wire connecting nut (AA).

• Connect the fan motor black wire

to the receiver black wire using a

wire connecting nut (AA).

• Connect the fan motor blue wire to

the receiver blue wire using a wire

connecting nut (AA).

• Secure each wire connecting nut

using electrical tape.

• Turn the wire connecting nut (AA)

upward and push the wiring into

the outlet box (MM).

IMPORTANT: Use the wire

connecting nuts (AA) supplied

with your fan. Secure the

connectors with electrical

tape and ensure there are no

loose strands or connections.

3H 6H

Operating Your Remote Control

Mounting the transmitter to the wall

• Mount the wall bracket (G) to the

wall by using the two mounting

screws (E). Ensure arrow on wall

bracket (G) is pointing upwards.

Wire

cutter

Electrical tape

Phillips

screwdriver

- Fan Speed

Press fan speed button to cycle through the fan’s four speeds. LED’s on the

fan speed button will illuminate to the corresponding speed.

2. The power supply to the remote

control receiver should be

connected through a mains

switch, i.e. existing wall switch.

3. Disconnect from power supply

at breaker box or wall switch

before working on remote control

receiver or ceiling fan.

4. Install receiver into the mounting

bracket/ canopy of the fan to

ensure proper protection.

5. This unit is to be used for the

control of ceiling fan and in a

AC110/120V 60Hz power supply

only.

6. Do not install in damp locations

or immerse in water. (For indoor

use only.)

7. Do not pull on or cut leads shorter.

8. Do not drop or bump the unit.

9. Do not mix old and new batteries.

10. Do not mix alkaline, standard

(carbon-zinc), or rechargeable (ni-

cad, ni-mh, etc.) batteries.

1H 3H 6H

Outlet box

Mounting

Bracket

AAA

BBB

VIEW AFTER

INSTALLATION

WIFI antenna mount

outside of the canopy

WIFI

antenna

Receiver

antenna

WIFI

antenna

Receiver antenna

(Leave connected

and do not cut)

Black

(or Red)

Black

Green

(or Bare)

Green

Outlet Box

in the ceiling

(MM)

Antenna

White

AA (x3)

Installation (continued)

Blue

Antenna

Black White

Green

AA (x3)

Outlet Box

in the ceiling

(MM)

3H 6H

Summary of content (15 pages)

PAGE 1
Item #311264804 Model #99434 Safety Information WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring experience, contact a licensed electrician. CAUTION: Incorrect wire connections will damage this receiver. CAUTION: To reduce the risk of fire or injury, do not use this product in conjunction with any variable (rheostat) wall control. INSTALLATION AND OPERATION CEILING FAN REMOTE CONTROL 1H 3H 6H 1.
PAGE 2
Item #1003 939 583 Model #59214 UL Model #52-ACKL USE AND CARE GUIDE ACKERLY 52-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS To view an instructional video on how to install this product: 1. Go to www.homedepot.
PAGE 3
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 12 Warranty................................................................................ 3 Care and Cleaning................................
PAGE 4
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser.
PAGE 5
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
PAGE 6
Pre-Installation (continued) PACKAGE CONTENTS A F B G C D H E I Part A Description Quantity Slide-on mounting bracket (inside canopy) 1 B Ball/downrod assembly C Part Description Quantity F Blade 5 G Light kit pan 1 1 H Light kit fitter assembly 1 Canopy 1 I Shatter resistant bowl 1 D Decorative motor collar cover 1 E Fan-motor assembly 1 IMPORTANT: This product and/or components are governed by one or more of the following U.S.
PAGE 7
Installation MOUNTING OPTIONS NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling. The maximum angle allowable is 30° away from horizontal. WARNING: To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked “Acceptable for fan support of 35 lbs. (15.9kg) or less” and use the screws provided with the outlet box.
PAGE 8
Assembly - Standard Ceiling Mount 1 2 Preparation for standard mounting ☐☐ Remove the canopy ring (GG) by turning the ring counterclockwise until it unlocks. ☐☐ Remove the mounting bracket (A) from the canopy (C) by loosening the two canopy screws (EE) located in the “L shaped” slots. ☐☐ Remove and save the two canopy screws (FF) in the round holes. This will enable you to remove the mounting bracket (A).
PAGE 9
Assembly - Hanging the Fan 1 2 Attaching the fan to the electrical box WARNING: To reduce the risk of fire, electric shock, or other personal injury, mount the fan to an outlet box or supporting system marked “Acceptable for fan support of 35 lbs. (15.9kg) or less” and use the mounting screws provided with the outlet box. Hanging the fan ☐☐ Carefully lift the fan-motor assembly (E) up to the slideon mounting bracket (A).
PAGE 10
Assembly - Hanging the Fan (continued) 3 Making the electrical connections WARNING: Each wire nut supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use. IMPORTANT: Use the plastic wire connectors (BB) supplied with your fan.
PAGE 11
Assembly - Hanging the Fan (continued) 4 5 Wrapping the extra wire Mounting the fan-motor assembly (standard mount) WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball. Failure to properly seat the tab in the groove could cause damage to the wiring. NOTE: Follow this step ONLY if you did not cut the extra length off from the wires coming from the ceiling fan.
PAGE 12
Assembly - Attaching the Light Kit 1 Installing the light kit pan IMPORTANT: It is critical to attach the light kit pan using the quick connector. The fan will not operate unless the light kit pan is connected to the fan. E ☐☐ Remove one screw (PP) from the black bracket below the fan motor assembly (E), and loosen but do not remove the other two screws. ☐☐ Connect the wires from the light kit pan (G) to the wires from the fan motor assembly (E) by connecting the 9-pin connectors together.
PAGE 13
Operating Your Fan A. Warm weather Turn on the power and check the operation of the fan. The fan pull chain controls the fan speed as follows: 1 pull - High; 2 pulls - Medium, 3 pulls - Low, 4 pulls - Off. YY Speed setting for warm or cool weather depends on factors such as the room size, ceiling height, number of fans and so on. The fan is shipped from the factory with the reversing switch (YY) positioned to circulate air downward.
PAGE 14
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. ☐☐ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. ☐☐ Clean your fan periodically to help maintain its new appearance over the years.
PAGE 15
Questions, problems, missing parts? Before returning to the store, call Home Depot Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.