Instructions / Assembly

LED22
Model No. 21LE31007
SKU No. 1006248565
Made in China
Printed in China
This is not a toy, for decorative use only.
DISTRIBUTED BY HOME DEPOT U.S.A., INC. 2455
PACES FERRY RD., N.W. Atlanta, GA 30339 All rights reserved.
Simply spread the branch
ps upward and outward.
THE TREE IS JUST
NOT FULL ENOUGH?
A LIGHT SET OR
AREA IS OUT?
Simply check the connecons
on your Quick Set® pole.
MISPLACED YOUR
REMOTE CONTROL?
Operate the color & funcon
by phone or tablet!
DOWNLOAD
THE APP!
1. Gently remove the plug from its electrical outlet, and carefully bind the
cord which contains the on/off push button foot pedal and plug.
2. Beginning with the tree’s top section; lift each section straight up from
the section below, and continue working downward.
NOTE: You may have to slightly wiggle each section as you lift each
section upward.
3. To remove the bottom and final section; loosen the eyebolt by turning in
a counter-clockwise direction and lift section “A” from the support collar
of the tree stand.
4. Gently fold the branches of each section upward, towards the center,
utilizing the fabric strapping provided and position in the storage
container.
NOTE: With the exception of the tree’s “top” section; by holding each
section upside down; the branches will collapse downward, due to the
hinging, aiding in the packing of each section into the storage container.
5. Unthread the eyebolt from the tree’s stand and fold together; placing in
the storage container.
6. It is recommended to always store the tree in a cool, dry location
protected from excessive exposure to heat or sunlight.
NOTE: Store your remote control in a SAFE & DRY location and remove the
batteries from remote control before storage.
NOTE: ALTHOUGH THE LED LIGHT STRINGS ON THE TREE ARE RATED FOR
INDOOR OR OUTDOOR USE; THE COMBINATION OF THE TREE WITH THE LED
LIGHTS IS FOR INDOOR USE ONLY.
DISASSEMBLY & STORAGE
This product was pre-tested before shipment and date coded. In
keeping with the National Electric Code, this product is intended for
seasonal (90 days max.) installation and use. For problems or
questions on this product call our customer service toll-free at
1-877-527-0313.
TROUBLESHOOTING
1. If the tree does not illuminate press the on/off button on your
remote control. If failure to light persists, the battery may need to be
replaced. Insert 2 x AAA batteries.
NOTE: The tree’s 10 function lighting capability is controlled by the use of
the remote control provided, by phone or tablet - by down loading the
App.
NOTE: By reducing the distance from your tree; you may achieve better
remote control and App reception.
If the tree fails to light due to a damaged or defective remote control;
please resort to App operation until a new remote control can be
provided through our customer service center.
2. If failure to light persists, press the on/off push button foot pedal; as it
may be in the “Off” mode.
3. If the top of the tree or another individual lettered section does not
illuminate, remove each section and then reinsert as instructed, to
ensure the electrical connection is made.
NOTE: A SPECIALTY NON-REPLACEABLE LED HAS BEEN APPLIED TO YOUR
PRE-LIT TREE; IN THE CASE THAT A INDIVIDUAL LED BULB BURNS OUT, THE
REMAINING LED BULBS WILL CONTINUE TO SHINE.
Fig 7
• HOME USE •
Remote Control Operation:
• Press the and buttons
at the same time.
- The tree will flash MULTI color
twice to activate.
Light
Show
Fig 8
COLOR
CHANGING
Steady
WW
Twinkle
WW
Steady
MLT
Slow Fade
WW
Slow Fade
MLT
Slow Color
Variable
Slow Fade Slow Flip Fast Flip
Light
Show
Light
Show
ACTIVATE YOUR
REMOTE CONTROL!
Press the and
buons at the
same me. The tree
will flash MULTI color
twice to acvate the
“HOME USE” operaon.
You are now all set!
COLOR
CHANGING
Steady
WW
Twinkle
WW
Steady
MLT
Slow Fade
WW
Slow Fade
MLT
Slow Color
Variable
Slow Fade Slow Flip Fast Flip
Light
Show
TIMER FEATURE:
• Press the “Timer” button; the trees lights will flash WARM WHITE 3 times –
Indicating that the 6 hour “On” / 18 hour “Off” timer has now been
activated.
• Note: The tree’s lights will automatically resume back to the “On”
position – 24 hours from when it was initially activated.
• Press the “Timer” button again, the trees lights will flash MULTI 3 times –
Indicating that the timer feature has now been deactivated.
• Note: The trees On/Off operation is now controlled by either the manual
operation of the remote control, foot-pedal control or by the App!
REMOTE CONTROL OPERATION
Your Pre-Shaped & Pre-lit LED Christmas Tree’s 10 Function capability is
controlled by the use of the remote control provided, (Fig 7) by phone
or tablet - by down loading the App!
IMPORTANT: “HOME MODE” Activation of your
Remote Control.
• Press the and at the same time.
• The Tree will flash MULTI color twice to activate.
• This double flashing of the MULTI color allows you to now operate the
remote control manually (Fig 8).
NOTE: Once set on “Home Mode”; If the tree is powered off by the use
of the push button foot pedal, remote control , by unplugging it
from the electrical outlet or by App; when powered back on, the tree
will automatically default to the last color & function selected.
• Please Note: If you again press these two buttons simultaneously;
(whereas the tree would flash MULTI just once), the tree would now be
in “Store Mode” – Causing the tree to automatically default to the
“Light Show” function (after remaining in idle for just 3 minutes) –
Cycling through ALL of the trees 10 lighting function combinations.
Light
Show
Fig 9
Simply press a desired lighting function button - Per the 10 individual
lighting functions available.
• Light Show
• Steady Warm White
• Steady Multi
• Twinkle Warm White
• Slow Fade Warm White
• Slow Fade Multi
• Slow Color Variable
• Fast Flip Warm White to Multi
• Slow Flip Warm White to Multi
• Slow Fade Warm White to Multi
SELECTING COLOR & FUNCTION
On/Off push button foot pedal operation:
The On/Off push button foot pedal is intended to provide basic
manual on/off operation only; and therefore cannot provide the
remote control’s or App’s 10 function lighting capability.
9. Once section “B” is fully inserted downward into section “A”; both
section “A” and section “B” will now be lit.
10. Again, untie and remove the fabric strapping bounding the
branches upright (Fig 9).
11. Gently guide the branches of section “B” downward into place.
12. Locate the top section of the tree which is identified by a label on
the outer branches marked “C” (Fig 5).
13. Insert the top section “C” onto the top of section “B” (Fig 5).
14. Once section “C” is fully inserted downward into section “B”; your
entire tree will now be lit.
15. Gently guide the branches of section “C” downward into place.
7. Locate the next section of the tree which is identified by a label
on the outer branches marked “B” (Fig 5).
8. Remove the protective plastic cap from the end of the pole on
section “B”; insert that end onto the top of the pole of section
“A” (Fig 4).
Fig 4
POWER POLE TECHNOLOGY
NOTE: Your tree has been designed with Power Pole
technology; allowing for each of the tree’s remaining sections
to light up automatically, upon a firm insertion of each
lettered section (Fig 5).
Fig 6
ASSEMBLY OF THE TREE
1. Locate the bottom section of the tree which is identified by a
label on the outer branches marked “A” (Fig 5).
2. Remove the protective plastic cap from the end of the pole, (that
is pinched to a point), and place that end into the tree stand. Be
sure that the pointed end of the pole extends to the bottom of
the stand.
3. Now tighten the eyebolt on the tree stand; being careful not to
over-tighten (Fig 3).
ASSEMBLY OF THE TREE STAND
1. Remove the tree stand from the plastic bag, loosen the eye
bolt and open the tree stand to form an “X”.
2. Align the hole for the insertion of the eyebolt.
3. Insert the eyebolt and begin threading in a clockwise direction
for a couple of rotations only; leaving enough room for the
tree’s pole from section “A” to be inserted into the assembled
stand (Fig 2).
4. Place the tree stand in its desired location; as once the tree is
fully assembled, it may become too difficult to move and
relocate.
Fig 2
Fig 3
4. Untie and remove the fabric strapping bounding the branches
upright (Fig 9).
5. Gently guide the branches downward into place.
6. Beneath the canopy of section “A”, contain’s an on/off push button
foot pedal with cord and plug (Fig 6).
Remove the twist-tie binding the cord together and insert the plug
into a working electrical outlet. Section “A” will now be lit. If section
“A” fails to light - press the On/Off push button foot pedal (Fig 5) - as
it may be in the “Off” position.
ASSEMBLY INSTRUCTIONS
(We recommend wearing proper clothing in order to prevent scratches
that may occur during the assembly process.)
Carefully unpack the contents from the tree’s carton (Fig 1).
Your tree will include the following components:
• A folding metal tree stand with (1) eyebolt.
• An on/off push button foot pedal with cord and plug (Fig 6); which is
pre-attached to your tree (Fig 5).
• (3) tree sections - labeled “A”, “B” and “C”, as shown in Fig 5.
• Contained in the poly-bag adhered to the interior flap of the carton is
the remote control (2 x AAA batteries) which operates your tree's 10
function lighting capability.
Fig 1
A
B
C
Foot
Pedal
Fig 5
A PRE-LIT TREE
SECTION IS OUT?
Firmly insert each
secon downward.
Concerns/
Quesons?
Please Call
1-877-527-0313
1st: Scan the QR code to download the “Ledup” app onto your smartphone or tablet.
2nd: Now that the App is installed; scan the QR code again to install the Ledup virtual
remote App. It is that easy!
NOTE: You need to enable *Bluetooth on your smartphone or tablet to use the
Ledup App.
You can now control your tree’s 10 functions either by the remote, smartphone
or tablet.
NOTE: To activate the “Home Use” operation on your App – tap any button.
DOWNLOAD THE “LEDUP” APP!
* Bluetooth protocol is not being used to communicate with the tree. A 2.4 GHz
frequency transmitter/receiver is being used to communicate with the tree.
Phone screen
Scan the QR code to download the remote App!
Apple StoreGoogle Play
22.5”
2022 Home Depot US
Grand Duchess Balsam Fir Tree Instruction Sheet - 10 Function Remote (English)
Date: 10/29/2021
15”
7.5ft Grand Duchess Balsam Fir (Model# 21LE31007 / Sku# 1006248565)