Instructions / Assembly

ManualsBrandsHome Decorators Collection ManualsArtificial Christmas Trees7.5 ft Carriage Fraser Fir LED Pre-Lit Artificial Christmas Tree with 1,000 Color Changing Mini Lights

Pre-Assembly

Package Contents

Christmas Tree

Model: 21PG90236

Sku # 1006 215 569

Tree top

Section 2

Section 1

Control box

Adapter

To Be Plugged

Into Wall

Outlet

Foot Pedal

on/off Switch

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

a. READ AND FOLLOW ALL

SAFETY INSTRUCTIONS.

When using electrical products, basic precautions should always

be followed, including the following:

b. Do not use seasonal products outdoors unless marked suitable for

indoor and outdoor use. When products are used in outdoor

applications,

connect the product to a Ground Fault Circuit Interrupting (GFCI)

outlet. If one is not provided, contact a qualified electrician for proper

installation.

c. This seasonal product is not intended for permanent installation or use.

d. Do not mount or place the product near gas or electric heaters,

fireplaces, candles, or other similar sources of heat.

e. Do not secure the wiring of the product with staples or nails, or place on

sharp hooks or nails.

f. Do not let lamps rest on the supply cord or on any wire.

g. Unplug the product when leaving the house, when retiring for the

night, or if left unattended.

h. This is an electric product and not a toy! To avoid risk of fire, burns,

personal injury and electric shock it should not be played with or

placed where small children can reach it.

i. Do not use this product for other than its intended use.

j. Do not hang ornaments or other objects from cord, wire, or light string.

k. Do not close doors or windows on the product or extensions cords as

this may damage the wire insulation.

l. Do not cover the product with cloth, paper, or any material that is not

a part of the product when in use.

m. This product is equipped with push-in type lamps. Do not twist lamps.

n. Read and follow all instructions that are on the product or provide with

the product.

SAVE THESE INSTRUCTIONS

Align both arrows

in a straight line

before sliding

down to insert

Open the

cap cover

Do Not Tamper

Internal Parts

NEED HELP?

DO NOT RETURN TO STORE. Call: 1-877-527-0313

Form 8am to 5pm EST, Monday through Friday.

Assembly

Step 1. Choose a location near a wall outlet.

Step 2. Unfold the legs of the tree stand and lay the stand

on the floor.

Step 3. Slide the locking disk of the tree stand down until it

snaps into place.

Assembling the tree

This tree assmbles with Quick Set® technology

---Set up and light up your tree in less than 10 minutes!

Step 1. Remove the protective caps from the tree bottom and

insert the pole into the tree stand.

Step 2. Continue by inserting the upper tree section(s) to the

lower section(s) until inserting the tree top.

Step 3. Shape the branches to your preference by working from

the bottom to the top. When adjusting branches, ensure

that all wires are free of branch hinges.

Step 4. Insert the adapter into the wall outlet. All your lights

should now be lit.

Step 5.

Shape the tree from the bottom to the top. Start with the

branches farthest from the pole – fan out in a star shape,

and continue until the entire tree is shaped.

Step 6. When finished shaping the branches, slightly upsweep all

branch tips for a uniform look.

Assembling the tree stand

Top view

Side view

COLLECTION

DECORATORS

Eye Bolt

80S

100S

80S

Part Description Quantity

A Tree top 1

B Tree center, Sticker 2 1

C Tree center, Sticker 1 1

D Tree stand 1

E Remote Control 1

Summary of content (3 pages)

PAGE 1
Christmas Tree Model: 21PG90236 Sku # 1006 215 569 DECORATORS C O L L E C T I O N® Assembly NEED HELP? DO NOT RETURN TO STORE. Call: 1-877-527-0313 Form 8am to 5pm EST, Monday through Friday. Safety Information IMPORTANT SAFETY INSTRUCTIONS Assembling the tree stand Step 1. Choose a location near a wall outlet. Step 2. Unfold the legs of the tree stand and lay the stand on the floor. Step 3. Slide the locking disk of the tree stand down until it snaps into place.
PAGE 2
Christmas Tree Model: 21PG90236 Sku # 1006 215 569 DECORATORS C O L L E C T I O N® LAMP REPLACEMENT Step 1. Grasp the power adapter or power cord plug, and than unplug from the power outlet. Do not pull the power cord. Step 2. Lift up lamp lock tab, then pull the lamp and plastic lamp base straight out of the lamp-holder. Step 3. Replace with a new spare lamp provided with this product.
PAGE 3
Christmas Tree Model: 21PG90236 Sku # 1006 215 569 DECORATORS C O L L E C T I O N® Tree Comes with Demo Mode Not Activated To activate the DEMO mode: 1. With the tree plugged in, press and hold the FUNCTION button of the in-line controller/receiver for 5 seconds. 2. The Clear Lights will blink 3 times. The tree is now in DEMO mode. 3. Within DEMO mode, the tree will display the COMBO pattern at all time unless the function button is pressed to change the flashing pattern.