Instructions / Assembly

Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2 Screw (#4) for SKU 1001844674 2 Outlet Box Screws (#6) 1 Mounting Plate (#7)
4 Screw (#4) for SKU 1001844668 for SKU 1001844674
1 Mounting Plate (#7) for SKU 1001844668 3 Wire Connectors (#5) 1 Ground Screw (#9)
INSTALLATION INSTRUCTIONS:
1. Mount the Mounting Plate (#7) to the Outlet Box (#8) using the two provided Outlet
Box Screws (#6).
2. Connect the white wire from the fixture to the white wire from the Outlet Box (#8),
and the black wire from the fixture to the black wire from the Outlet Box (#8). Cover
the two wire connections using the two provided Wire Connectors (#5). Wrap the
two wire connections with electrical tape for a more secure connection. If your outlet
box has a ground wire (green or bare copper), connect fixture’s ground wire to it
using the wire connector (#5). Otherwise connect the copper ground wire from the
fixture to Ground screw (#9) on the Mounting Plate (#7). Note: If you have electrical
questions, consult your
local electrical code for approved grounding methods.
3. Mount the body of the fixture on the wall by aligning the Mounting Plate wing holes
to side holes of the Back Plate (#3). Be careful not to pinch any of the wires between
the fixture and the Outlet Box (#8). Tighten the fixture to the wall by screwing the
Screws (#4) into the side holes of the Back Plate (#3).
4. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn
the light switch on to activate the fixture.