Instructions / Assembly

Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
4 Screw (#8) 2 Outlet Box Screws (#10) 1 Mounting Plate (#9)
3 Wire Connectors (#13) 1 Ground Screw (#12)
INSTALLATION INSTRUCTIONS:
1. Mount the Mounting Plate (#9) to the Outlet Box (#11) using the two provided
Outlet Box Screws (#10).
2. Connect the white wire from the fixture to the white wire from the Outlet Box (#11),
and the black wire from the fixture to the black wire from the Outlet Box (#11).
Cover the two wire connections using the two provided Wire Connectors (#13).
Wrap the two wire connections with electrical tape for a more secure connection. If
your outlet box has a ground wire (green or bare copper), connect fixture’s ground
wire to it using the wire connector (#13). Otherwise connect the copper ground wire
from the fixture to Ground screw (#12) on the Mounting Plate (#9). Note: If you
have electrical questions, consult your local electrical code for approved grounding
methods.
3. Mount the body of the fixture on the wall by aligning the Mounting Plate wing holes
to side holes of the Back Plate (#7). Be careful not to pinch any of the wires between
the fixture and the Outlet Box (#11). Tighten the fixture to the wall by screwing the
Screws (#8) into the side holes of the Back Plate (#7).
4. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn
the light switch on to activate the fixture.