Item # 1003063516 # 1003063510 # 1003063513 Model # 239-118-165-Y # 239-118-121-Y # 239-118-48-Y USE AND CARE GUIDE EDENFIELD COLLECTION: ELECTRIC FIREPLACE MEDIA MANTEL IMPORTANT INSTRUCTIONS PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN ELECTRICAL SHOCK OR FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. INSTALLER: Leave this manual with the appliance.
Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware Included. . . . . . . .
Pre-Assembly PLANNING ASSEMBLY Before you begin assembly, locate the instructions and hardware. Compare all parts with the Hardware Included and Package Contents lists. Be sure you have all the parts and can identify them. A helping hand is always good. Assemble your mantel with an adult assistant if possible. Some pieces are heavy and will need to be held by a helper. Assembly time will take approximately 30-60 minutes. Before assembly, use scissors to unwrap the parts from the packaging.
Pre-Assembly (continued) PACKAGE CONTENTS J D A F K E J E C G L M H E N E H D B Part Description Quantity Part Description Quantity A Top Panel 1 H Cabinet Door 2 B Base Panel 1 J Side Back Panel 2 C Media Shelf 1 K Upper Back Panel 1 D Side Panel 2 L Top Trim 1 E Adjustable Shelf 4 M Left Trim 1 F Left Inside Panel 1 N Right Trim 1 G Right Inside Panel 1 4
Assembly 1 AA Attaching the trim to side panels □□ Locate the inside panels (F & G) and place on a soft surface to protect the finish. M □□ Attach the left trim (M) and right trim (N) to the inside panels by turning the bolts (AA) clockwise through the connector. Do not strip the bolts (AA) by overtightening. F N G the top trim to media 2 Attaching base AA □□ Locate the media shelf (C) and place on a soft surface to protect the finish.
Assembly (continued) the media shelf 3 Attaching □□ Insert four wood dowels (BB) into the unthreaded holes in the media shelf assembly (C). G C □□ Line up the four wood dowels (BB) in the media shelf (C) with the unthreaded holes in the left and right inside panel (G & F). □□ Press together firmly until flush. F □□ Insert four bolts (AA) into the connector on the media shelf (C). □□ Attach the left and right inside panels (G & F) to the media shelf assembly (C) by turning the bolts (AA) clockwise.
Assembly (continued) the side panels 5 Attaching □□ Line up the connectors on the side panels (D) with holes on the base (B). D □□ Attach the left and right side panels (D) to the base assembly by inserting four bolts (AA) through the connector in the side panels and turning clockwise. Do not strip the bolts (AA) by overtightening.
Assembly (continued) 7 A ttaching the back panels □□ Locate the back panels (J & K) and line them up to the back of the media console with the finished side facing in. □□ Insert and tighten thirty-two screws (DD) to attach the back panels (J & K) to the media console. J □□ Do not strip the screws (DD) by overtightening. K J DD 8 A ttaching hardware onto the doors □□ Locate the two cabinet doors (H) and place on a soft surface to protect the finish.
Assembly (continued) 9 Attaching the doors □□ Line up the hinges in the left and right doors (H) with the hinge plates in the left and right side panels. □□ Tighten the screws to attach the hinges to the hinge plates. Do not strip the screws by overtightening. H H 10 A ttaching the knobs □□ Attach the handles (CC) to the left and right doors (H) by inserting the bolts through the doors (H) and turning clockwise into the knobs (CC). Do not strip the bolts by overtightening. CC 9 HOMEDEPOT.
Assembly (continued) 11 I nstalling the shelves FF □□ Locate the four shelves (E) and place them on a soft surface to protect the finish. □□ Insert the sixteen shelf pins (FF) into the interior of the side panels (D, F & G). Be sure to insert the pins parallel to one another to ensure the shelves (E) are level. E □□ Insert the shelves (E) onto the shelf pins (FF). E E E 12 I nstalling the firebox □□ Insert the firebox into the media console through the back opening.
Care & Cleaning □□ Always turn the heater OFF and unplug the power cord from the outlet before cleaning. □□ Cleaning of the control panel, located in the upper right-hand corner of the fireplace behind the sliding control panel cover, is to be done only using a soft cloth, slightly dampened in water (if needed, a small amount of dish soap can be added to the water) and dried using a clean, dry soft cloth. Cleaning of the screen diffuser is to be done using only water and lint free cloth.
Service Parts (continued) Part Description Quantity Part Number 23-118-165-Y Aged White Finish Part Number 23-118-121-Y Burnished Walnut Finish Part Number 23-118-48-Y Espresso Finish A Top Panel 1 20-01-060 20-01-073 20-01-086 B Base Panel 1 20-01-061 20-01-074 20-01-087 C Media Shelf 1 20-01-062 20-01-075 20-01-088 D Side Panel 2 20-01-063 20-01-076 20-01-089 E Adjustable Shelf 4 20-01-064 20-01-077 20-01-090 F Left Inside Panel 1 20-01-065 20-01-078 20-01-091 G
Troubleshooting If you have any questions regarding the product, please call Home Depot Customer Service, 1-800-986-3460, 8 a.m. –7 p.m. EST, Monday – Friday, 9 a.m. - 6 p.m., EST, Saturday. Problem Possible Cause Solution The fireplace does not operate. □□ The fireplace is not plugged in. □□ Make sure the fireplace is plugged in to a standard 120V outlet. □□ A circuit breaker is tripped or a fuse blown.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use. Manufactured by: GHP Group, Inc. • 6440 W. Howard St.
Artículo # 1003063516 # 1003063510 # 1003063513 Modelo # 239-118-165-Y # 239-118-121-Y # 239-118-48-Y GUÍA DE USO Y CUIDADO COLECCIÓN EDENFIELD: CHIMENEA ELÉCTRICA CON REPISA INSTRUCCIONES IMPORTANTES POR FAVOR, LEA ESTE MANUAL ANTES DE LA INSTALACIÓN Y USO DEL DISPOSITIVO ¡ADVERTENCIA! SI LA INFORMACIÓN EN ESTE MANUAL NO SE SIGUE CON EXACTITUD, PUEDE RESULTAR UN CHOQUE ELÉCTRICO O INCENDIO OCASIONANDO DAÑOS A LA PROPIEDAD, LESIONES PERSONALES O LA MUERTE.
Tabla de contenido Tabla de contenido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Garantía. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Pre-ensamblaje. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Planificación del ensamblaje. . . . . . . . . . . . . . . . . . . . . . . . . 17 Herramientas necesarias. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Piezas incluidas. . . . . . . . . . . . . . . . . .
Pre-ensamblaje PLANIFICACION DEL ENSAMBLAJE ntes de iniciar el ensamblaje localice las instrucciones y las piezas. Compare todas las piezas con la lista de piezas incluidas y contenido A del embalaje. Asegúrese de tener todas las piezas y de que pueda identificarlas. Siempre es bueno contar con ayuda. Ensámblelo con asistencia de una persona adulta si es posible. Algunas piezas son pesadas y necesitará ayuda. El tiempo de ensamblaje se estima entre 30-60 minutos.
Pre-ensamblaje (continuación) CONTENIDO DEL PAQUETE J D A F K E J E C G L M H E N E H D B Pieza Descripción Cantidad Pieza Descripción Cantidad A Panel superior 1 H Puerta del mueble 2 B Panel de base 1 J Panel trasero lateral 2 C Repisa multimedia 1 K Panel trasero superior 1 D Panel lateral 2 L Moldura superior 1 E Repisa ajustable 4 M Moldura izquierdo 1 F Panel interior izquierdo 1 N Moldura derecho 1 G Panel interior derecho 1 18
Ensamblaje de las molduras en los 1 Colocación paneles laterales AA □□ Localice los paneles interiores (F y G) y colóquelos sobre una superficie suave para proteger el acabado. □□ Fije la moldura izquierda (M) y la moldura derecha (N) a los paneles interiores girando los tornillos (AA) en el sentido de las agujas del reloj a través del conector. No dañe los tornillos (AA) apretándolos demasiado.
Ensamblaje (continuación) de la repisa 3 Colocación multimedia G □□ Inserte cuatro clavijas de madera (BB) dentro de los orificios sin rosca en la repisa multimedia (C). C □□ Alinee las cuatro clavijas de madera (BB) en la repisa multimedia (C) con los orificios sin rosca en los paneles interiores izquierdo y derecho (G y F). □□ Presiónelos uno contra otro firmemente hasta que estén al ras. F □□ Inserte cuatro tornillos (AA) dentro de los conectores en la repisa multimedia (C).
Ensamblaje (continuación) de los paneles 5 Colocación laterales □□ Alinee los conectores en los paneles laterales (D) con los orificios en la base (B). D □□ Fije los paneles laterales izquierdo y derecho (D) al ensamblaje de la base insertando cuatro tornillos (AA) a través de los conectores en los paneles laterales y girando en el sentido de las agujas del reloj. No dañe los tornillos (AA) apretándolos demasiado.
Ensamblaje (continuación) 7 Colocación de los paneles traseros □□ Localice los paneles traseros (K y J) y alinéelos a la parte trasera de la consola multimedia con la cara con acabado mirando hacia adentro. □□ Inserte y apriete treinta y dos tornillos (DD) para fijar los paneles laterales (J y K) a la consola multimedia. J K □□ No dañe los tornillos (DD) apretándolos demasiado.
Ensamblaje (continuación) 9 Colocación de las puertas □□ Alinee las bisagras en las puertas izquierda y derecha (H) con las placas de bisagra en los paneles laterales izquierdo y derecho. □□ Apriete los tornillos para fijar las bisagras a las placas de bisagra. No dañe los tornillos apretándolos demasiado.
Ensamblaje (continuación) 11 Instalación de las repisas FF □□ Localice las cuatro repisas (E) y colóquelas sobre una superficie suave para proteger el acabado. □□ Inserte dieciséis clavijas para estantes (FF) en la cara interior de los paneles laterales (D, F y G). Asegúrese de insertar las clavijas paralelas entre sí para asegurar que las repisas estén niveladas. E □□ Inserte las repisas (E) colocándolas sobre las clavijas de repisa (FF).
Cuidado y limpieza □□ Siempre apague el calefactor y desconecte el cable eléctrico del tomacorriente antes de limpiarlo. □□ La limpieza del panel de control, localizado en la esquina superior derecha de la chimenea, debe hacerse usando solamente un paño suave, ligeramente humedecido en agua (de ser necesario, se puede agregar una pequeña cantidad de jabón de platos al agua) y secarse usando un paño suave limpio y seco.
Piezas de servicio (continuación) Pieza Descripción Cant.
Resolución de fallas Si tiene preguntas respecto al producto, llame a Servicio al Cliente de Home Decorators al 1-800-986-3460, 8 a.m. - 7 p.m., Hora del Este de lunes a viernes, 9 a.m. - 6 p.m., Hora del Este de Sábado Problema Causa posible La chimenea no funciona. □□ La chimenea no está enchufada. Solution □□ Un disyuntor de circuito se ha activado o un fusible ha explotado. □□ El interruptor ON/OFF está defectuoso. La luz de energía está encendida pero el efecto de la llama no es visible.
¿Preguntas, problemas o partes faltantes? Antes de regresar a la tienda, llame al servicio de atención al cliente de Home Decorators Collection 8 a.m. - 7 p.m., Hora del Este de lunes a viernes, 9 a.m. - 6 p.m., Hora del Este de Sábado 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Guarde este manual para futuras referencias. Fabricado por: GHP Group, Inc. • 6440 W. Howard St.