Instructions / Assembly

16
I
G
LL
ww
10
Attaching the light kit mounting
plate to the mounting ring
11
□ Remove one of the three light kit mounting screws
(LL) from the mounting ring (WW) and loosen the
other two screws. (Do not remove.)
□ While holding the light kit (I) under your fan motor
assembly (G), make the wire connections:
- White to white
- Black to black
□ Place the key holes in the light kit (I) over the two
screws (LL) previously loosened from the mounting
ring (WW). Turn the light kit (I) until the light kit (I)
locks in place at the narrow section of the key holes.
□ Securely tighten the two light kit mounting screws
(LL) previously loosened and the one (LL) previously
removed.
Attaching the glass shade
to the glass frame
Assembly — Installing the Light Kit
□ Mount the glass shade (J) to the glass frame (K) using
the glass thumbscrew (MM) that already installed in
the glass frame (K), then gently tighten the glass
thumbscrew (MM) by hand evenly to the glass shade
(J). Do not overtighten.
J
K
MM