Instructions / Assembly

Black Blue White

Green

Assembly — Hanging the Fan (continued)

Making the electrical connections

WARNING: To avoid possible electrical shock, ensure the

electricity is turned off at the circuit breaker or main fuse box

before wiring.

WARNING: Check to see that all connections are tight,

including the ground, and that no bare wire is visible at the

wire nuts, except for the ground wire.

Follow the steps below to connect the fan to your house

supply wires. Secure the wire nuts (GG) supplied with your

fan by wrapping the connections with electrical tape.

Motor to receiver electrical connections:

□ Connect the black wire from the fan to the black wire

marked "TO MOTOR L" from the receiver (L).

□ Connect the white wire from the fan to the white wire

marked "TO MOTOR N" from the receiver (L).

□ Connect the blue wire from the fan to the blue wire

marked "For Light" from the receiver (L).

Receiver to house supply wires electrical connections:

□ Connect the black (hot) wire from the ceiling to the

black wire marked "AC in L" from the receiver (L).

□ Connect the white (neutral) wire from the ceiling to

the white wire marked "AC in N" from the receiver

(L).

□ If your outlet box (1) has a ground wire (green or bare

copper), connect it to the fan ground wires; otherwise,

connect the hanging ball (E) ground wire to the

mounting bracket (B).

□ Secure the wire connection with a plastic wire nut

(GG) provided with the electrical hardware.

□ After connecting the wires, spread them apart so that

the green and white wires are on one side of the

outlet box (1) and the black and blue wires are on the

other side. Carefully tuck the wire connections up

into the outlet box (1).

GG (x6)

Black White

Green