Instructions / Assembly

WARRANTY
3-year Limited Warranty
This product carries a three (3) year warranty against defects in workmanship and materials
for the repair or replacement of products from the date of purchase. This product is not
guaranteed against wear or breakage due to misuse, abuse, accident, negligence or normal
wear and does not apply to floor models or display trees. This Limited Warranty only applieswear and does not apply to floor models or display trees. This Limited Warranty only applies
to the original purchaser
, and only applies with proof of purchase. Please keep your original
store sales receipt, as no warranty claims will be considered without original proof of
purchase. Repair/Replacement as provided by this warranty is the exclusive remedy of the
consumer and does not place the manufacturer liable for any incidental or consequential
damages.
Date Code: 04012024_2008499Date Code: 04012024_2008499
Importer: The Home Depot
Address: 2455 PACES FERRY ROAD ATLANTA, GA 30339Address: 2455 PACES FERRY ROAD ATLANTA, GA 30339
Tel: [phone]Tel: [phone]
Adapter Model No. TS-36W12VAdapter Model No. TS-36W12V
Troubleshooting
The tree does not
light
Ensure that all tree sections are connected into each other
well by pressing each section down and rotating. Make surewell by pressing each section down and rotating. Make sure
power cord plug is securely inserted into a working electricalpower cord plug is securely inserted into a working electrical
outlet.
If you are still experiencing problems with the tree pleaseIf you are still experiencing problems with the tree please
call 1-800-986-3460 for instructions.
Top section does
not light
Push downward and rotate thePush downward and rotate the
top section to B section to
make sure they are connected
securely
.
Top Section Gap
Pull down each layer branches
on top section.
More
troubleshooting
information
Please scan the QR Code.Please scan the QR Code.
Instructions of Remote Control
Please note this tree has a remote control.
If the remote control does not work, check whether the battery ofIf the remote control does not work, check whether the battery of
the remote control is out of power.the remote control is out of power.
WARNING - This is not a toy and is not intendedWARNING - This is not a toy and is not intended
for use by children.
a) DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.a) DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
b) Remove and immediately recycle or dispose of used batteries according to localb) Remove and immediately recycle or dispose of used batteries according to local
trash or incinerate.
regulations and keep away from children. Do NOT dispose of batteries in household
Care and Cleaning
□ Remove all ornaments and decorations.
Unplug the cord from the wall outlet.
Gently lift the tree top straight up to remove from the center section and fold all branches
towards the pole.
□ Repeat this step for the center and bottom tree sections.
Carefully place all tree sections into a shipping box and tape it shut.
□
□
□
Store your tree in a cool, dry place away from sunlight.
□
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Warning: Please note that changes or modifications of this product is not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonabledevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generatesprotection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However
, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
□
Increase the separation between the equipment and receiver.Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
Consult the dealer or an experienced radio/TV technician for help.
□
□
□
connected.
Use and Care Instructions
□ Before using or reusing, inspect product carefully. Discard any products that have cut, damaged,Before using or reusing, inspect product carefully. Discard any products that have cut, damaged,
or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections,
or exposed copper wire.
□ When not in use, store neatly in a cool, dry location protected from sunlight.
□ When storing the product, carefully remove the product from wherever it is placed, including tree,
branches, or bushes, to avoid any undue strain or stress on the product conductors, connections
and wires.
To replace the remote control battery:
1. Open the battery case according to the mark on the back of the1. Open the battery case according to the mark on the back of the
2. Replace with a new button cell “CR2025" (3 volt) into the compartment.2. Replace with a new button cell “CR2025" (3 volt) into the compartment.
RELEASE
+
PUSH
OPEN
CR2025
3 V
Operation
Turning on the tree
Plug the well-connected power cord from the tree section (D) into a proper outlet.Plug the well-connected power cord from the tree section (D) into a proper outlet.
Unlock the Demo function. Please see the below to see howInstructions of remote controlUnlock the Demo function. Please see the below to see howInstructions of remote control
to unlock and lock the Demo function. Press the remote control or foot pedal switch to chooseto unlock and lock the Demo function. Press the remote control or foot pedal switch to choose
functions and timer control.functions and timer control.
Press Fn button, select the function below in proper order. Press the function key,Press Fn button, select the function below in proper order. Press the function key,
select from the following corresponding lighting functions:select from the following corresponding lighting functions:
□
Please pull out the insulation tape from the remote control, before starting to use it.Please pull out the insulation tape from the remote control, before starting to use it.
Insulating tape
1. Demo
2. Twinkling2. Twinkling
3. Warm White Steady3. Warm White Steady
4. Warm White Flashing4. Warm White Flashing
5. Warm White Slow Fade5. Warm White Slow Fade
There is memory mode on function adjustment.
RF
ON
OFF
FN
Demo
6H
8H
How to Unlock the Demo function:How to Unlock the Demo function:
Press & hold the Demo button on the remote control until the lights flash once, then the footPress & hold the Demo button on the remote control until the lights flash once, then the foot
pedal switch and the remote control are unlocked in the Demo function.pedal switch and the remote control are unlocked in the Demo function.
How to Lock the Demo function:
Press & hold the Demo button on the remote control until the lights flash 3 times, then thePress & hold the Demo button on the remote control until the lights flash 3 times, then the
foot pedal switch and the remote control are locked in the Demo function.foot pedal switch and the remote control are locked in the Demo function.
Demo function unlocked:
Press 6H button, one indicator light on the foot pedal switch is on.Press 6H button, one indicator light on the foot pedal switch is on.
□
The tree lights will automatically run through a 6-hours ON,The tree lights will automatically run through a 6-hours ON,
18-hours OFF cycle.
Press 8H button, two indicator lights on the foot pedal switch are on.
□
The tree lights will automatically run through a 8-hours ON, 16-hours OFF cycle.The tree lights will automatically run through a 8-hours ON, 16-hours OFF cycle.
Timer function:
To turn off the timer function, press the foot pedal switch or OFF buttonTo turn off the timer function, press the foot pedal switch or OFF button
on remote control to turn off the timer.on remote control to turn off the timer.
Foot pedal switchFoot pedal switch
remote control.
d) Call a local poison control center for treatment information.d) Call a local poison control center for treatment information.
f) The battery voltage is 3 volts.
h) Do not force discharge, recharge, disassemble, heat above 60ºC/140ºF or incinerate. Doingh) Do not force discharge, recharge, disassemble, heat above 60ºC/140ºF or incinerate. Doing
j) Do not mix old and new batteries, different brands or types of batteries, such as alkaline,j) Do not mix old and new batteries, different brands or types of batteries, such as alkaline,
k) Remove and immediately recycle or dispose of batteries from equipment not used for ank) Remove and immediately recycle or dispose of batteries from equipment not used for an
l) Always completely secure the battery compartment. If the battery compartment does notl) Always completely secure the battery compartment. If the battery compartment does not
children.
so may result in injury due to venting, leakage or explosion resulting in chemical burns.so may result in injury due to venting, leakage or explosion resulting in chemical burns.
carbon-zinc, or rechargeable batteries.
extended period of time according to local regulations.extended period of time according to local regulations.
close securely, stop using the product, remove the batteries, and keep them away fromclose securely, stop using the product, remove the batteries, and keep them away from
c) Even used batteries may cause severe injury or death.c) Even used batteries may cause severe injury or death.
e) Use a button cell CR2025.
g) Non-rechargeable batteries are not to be recharged.
i)
Ensure the batteries are installed correctly according to polarity (+ and -).
Twinkling
WW
Steady
WW
Flashing
WW
Slow Fade
RF
ON
OFF
FN
Demo
6H
8H
Twinkling
WW
Steady
WW
Flashing
WW
Slow Fade
Maintenance
CAUTION:
.Ensure the product is disconnected from the power source before attempting to service Use
only approved fuses Do not replace the attachment plug as it contains a safety device that should not be.,
removed.
REPLACING FUSES
Care and Cleaning
□ When finished with use carefully remove the product from it s location including trees branches,’,,,
or bushes This helps to avoid any undue strain or stress on the product conductors connections. ,,
and wires.
□ If the product is placed on a tree the tree should be well maintained well secured and stable,,,.
□ Wipe the unit with a damp cloth and allow the unit to dry before storing Store the product neatly in.
a cool dry location protected from sunlight,.
UL Model No. L-092S
Lock the LED bulb.
□
REPLACING BULBS
Grasp the plug and remove from the receptacle
or other outlet device Do not unplug by pulling.
on cord.
Replace bulb with only Volt, Watt,4.0/3.0 0.08/0.06
LED type bulb (provided with product).
Remove the bulb from the plastic base by
straightening the bulb wires and pulling the
bulb out.
Thread leads of new bulb (CC) through holes
in old base with one lead in each hole.
After bulb is fully inserted into base, bend each lead up, like other lamps in the light set so that
the leads will touch the contacts inside the lampholder.
□
□
□
□
□
CC
3
CC
Unlock the burned out LED bulb by lifting the hook
and pulling both the bulb and plastic base straight
□
out of the bulb holder Do not twist bulbs..
CC
12
CC
New lamp base
If the new lamp base does not fit in lampholder,
follow the steps below before step 3.
4
If connecting to a lighting string that does not have a Wattage (W) rating {found on the tag within
6 inches of the plug} calculate the wattage as follows: Multiply the current ( A) which is on the0.1
flag-type tag by 120.
For Example: Lighting string is rated 120 V, 60 Hz, 0.1 Amps. 0.1 X 120 = 12 Watts
Add the wattage of each light string together for a total of 216 Watts or less. (Do not exceed 216
Watts)
The LED lamp has polarity. Do not deliberately change the direction of the LED lamp in the lamp
holder (always match the long lead of LED bulb towards the hook on lamp base).
Grasp the plug and remove from the receptacle
or other outlet device Do not unplug by pulling.
on cord.
Open the fuse compartment by sliding the fuse
access cover on the plug towards the blades,
as shown.
Close the fuse compartment..Slide closed the fuse access cover on top of attachment plug
□
□
□
Carefully remove the fuse s().
□
Risk of fire. Replace fuse only with 3 Amp, 125 Volt
fuse (provided with product).
□
When using electrical products basic precautions should always be followed Please read and follow all,.
safety instructions prior to use.
Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
When products are used for outdoor applications connect the product to a Ground Fault Circuit,
Interrupting GFCI outlet If one is not provided contact a qualifed electrician for proper() . ,
installation.
This seasonal use product is not intended for permanent installation or use-.
Unplug the product when leaving the house when retiring for the night or if left unattended,,.
Do not use this product for other than its intended purpose.
Do not hang ornaments or other objects from cord wire or light string,, .
Do not let the lamps rest on the supply cord or on any wire.
Do not move the tree by pulling the tree tips or tree branches.
Do not cover the product with cloth, paper or any material not part of the product when in use.
Read and follow all instructions that are on the product or provided with the product.
This product is for indoor use only. The electrical rating 0.57 A 120 V 60 Hz.
Tel: 1-855-HDHOLIDAY (1-855-434-6543)
Foot pedal
switch