Item # 207000995 # 207000996 # 207001015 Model # 258-102-170-Y # 258-102-165-Y # 258-102-48-Y USE AND CARE GUIDE AVONDALE GROVE COLLECTION: ELECTRIC FIREPLACE MEDIA MANTEL IMPORTANT INSTRUCTIONS PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN ELECTRICAL SHOCK OR FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. INSTALLER: Leave this manual with the appliance.
Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware Included. . . . . . . .
Pre-Assembly VVV PLANNING ASSEMBLY Before you begin assembly, locate the instructions and hardware. Compare all parts with the Hardware Included and Package Contents lists. Be sure you have all the parts and can identify them. A helping hand is always good. Assemble your mantel with an adult assistant if possible. Some pieces are heavy and will need to be held by a helper. Assembly time will take approximately 30-60 minutes. Before assembly, use scissors to unwrap the parts from the packaging.
Pre-Assembly (continued) PACKAGE CONTENTS A C B D J E F V G H K M Part L Description R N P U S Quantity Part T Description W X Quantity A Top Panel 1 M Top Trim 1 B Media Shelf 1 N Side Back Panel 2 C Base Panel 1 P Right Inside Panel 1 D Upper Back Panel 1 R Adjustable Shelf 2 E Left Side Panel 1 S Left Front Panel 1 F Right Side Panel 1 T Right Front Panel 1 G Left Inside Panel 1 U Support Leg 1 H Cabinet Door 2 V Firebox 1 J Top Rail
Assembly the support leg and connectors 1 Attaching U □□ Locate the base panel (C) and place on a soft surface to protect the finish. Line up and insert the long connector (CC) on the support leg (U) into the unthreaded holes in the center of the base panel (C). □□ Attach the support leg (U) to the base panel (C) by turning a bolt (AA) clockwise through the long connector (CC). Do not strip the bolt (AA) by overtightening.
Assembly (continued) the inner panels 3 Attaching □□ Insert four wood dowels (DD) into the unthreaded holes in the top trim (M). P □□ Line up the four wood dowels (DD) in the top trim (M) with the unthreaded holes in the left and right inside pieces (G & P). □□ Press together firmly until flush. M G DD the media shelf 4 Attaching AA BB □□ Insert four wood dowels (DD) in the unthreaded holes of the media shelf (B).
Assembly (continued) the base 5 Attaching CC AA DD □□ Insert four wood dowels (DD) into the unthreaded holes in the media shelf assembly. □□ Line up the wood dowels (DD) with the unthreaded holes in the base panel (C). Press together firmly until flush. □□ Attach the base panel (C) to the media shelf assembly by inserting two bolts (AA) through the long connectors (CC) on the inner panels (G & P) and turning clockwise. Do not strip the bolts (AA) by overtightening.
Assembly (continued) 7 A ttaching the side panels CC AA DD □□ Insert eight wood dowels (DD) into the unthreaded holes in the sides of the media shelf (B) and the base panel (C). □□ Line up the wood dowels (DD) in the sides of the media shelf (B) and the base panel (C) with the unthreaded holes in the left and right side panels (E & F). E □□ Line up the long connectors (CC) in the media shelf (B) and the base panel (C) with the holes in the left and right side panels (E & F).
Assembly (continued) 9 P reparing the top panel LL □□ Locate the top panel (A) and place it on a soft surface to protect the finish with the finished side facing down. □□ Insert four long cam lock dowels (KK) into the threaded holes in the sides of the top panel (A) by turning clockwise. Do not strip the long cam lock dowels (KK) by overtightening. □□ Insert four short cam lock dowels (LL) into the threaded holes in the front of the top panel (A) by turning clockwise.
Assembly (continued) 11 A ttaching the back panels □□ Locate the back panels (D & N) and line them up to the back of the media console with the finished side facing in. □□ Insert and tighten twenty-eight screws (FF) to attach the back panels (D & N) to the media console. D □□ Do not strip the screws (FF) by overtightening. N N FF 12 A ttaching the doors and knobs □□ Loosen the screws in the hinge plates (GG) in the left and right side panels (E & F).
Assembly (continued) 13 I nstalling the shelves □□ Locate the two shelves (R) and place them on a soft surface to protect the finish. □□ Insert the 8 shelf pins (HH) into the interior of the side panels (E, F, G & P). Be sure to insert the pins parallel to one another to ensure the shelves (R) are level. HH R □□ Insert the shelves (R) onto the shelf pins (HH) with the finished side visible. R 14 I nstalling the firebox □□ Insert the firebox (V) into the media console through the front opening.
Care & Cleaning □□ Always turn the heater OFF and unplug the power cord from the outlet before cleaning. □□ Cleaning of the control panel, located in the upper right-hand corner of the fireplace behind the sliding control panel cover, is to be done only using a soft cloth, slightly dampened in water (if needed, a small amount of dish soap can be added to the water) and dried using a clean, dry soft cloth. Cleaning of the screen diffuser is to be done using only water and lint free cloth.
Service Parts (continued) Part Description Quantity Part Number 258-102-170-Y Aged Black Finish Part Number 258-102-165-Y Aged White Finish Part Number 258-102-48-Y Espresso Finish A Top Panel 1 20-06-176 20-06-194 20-06-212 B Media Shelf 1 20-06-177 20-06-195 20-06-213 C Base Panel 1 20-06-178 20-06-196 20-06-214 D Upper Back Panel 1 20-06-179 20-06-197 20-06-215 E Left Side Panel 1 20-06-180 20-06-198 20-06-216 F Right Side Panel 1 20-06-181 20-06-199 20-06-217 G
Troubleshooting If you have any questions regarding the product, please call Home Depot Customer Service, 1-800-986-3460, 8 a.m. –7 p.m. EST, Monday – Friday, 9 a.m. - 6 p.m., EST, Saturday. Problem Possible Cause Solution The fireplace does not operate. □□ The fireplace is not plugged in. □□ Make sure the fireplace is plugged in to a standard 120V outlet. □□ A circuit breaker is tripped or a fuse blown.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use. Manufactured by: GHP Group, Inc. • 6440 W. Howard St.
Núm. de artículo # 207000995 # 207000996 # 207001015 Núm. de modelo # 258-102-170-Y # 258-102-165-Y # 258-102-48-Y GUÍA DE USO Y CUIDADO COLECCIÓN AVONDALE GROVE: CHIMENEA ELÉCTRICA CON REPISA INSTRUCCIONES IMPORTANTES POR FAVOR, LEA ESTE MANUAL ANTES DE LA INSTALACIÓN Y USO DEL DISPOSITIVO ¡ADVERTENCIA! SI LA INFORMACIÓN EN ESTE MANUAL NO SE SIGUE CON EXACTITUD, PUEDE RESULTAR UN CHOQUE ELÉCTRICO O INCENDIO OCASIONANDO DAÑOS A LA PROPIEDAD, LESIONES PERSONALES O LA MUERTE.
Tabla de contenido Tabla de contenido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Garantía. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Pre-ensamblaje. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Planificación del ensamblaje. . . . . . . . . . . . . . . . . . . . . . . . . 18 Herramientas necesarias. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Piezas incluidas. . . . . . . . . . . . . . . . . .
Pre-ensamblaje VVV PLANIFICACION DEL ENSAMBLAJE ntes de iniciar el ensamblaje localice las instrucciones y las piezas. Compare todas las piezas con la lista de piezas incluidas y contenido A del embalaje. Asegúrese de tener todas las piezas y de que pueda identificarlas. Siempre es bueno contar con ayuda. Ensámblelo con asistencia de una persona adulta si es posible. Algunas piezas son pesadas y necesitará ayuda. El tiempo de ensamblaje se estima entre 30-60 minutos.
Pre-ensamblaje (continuación) CONTENIDO DEL PAQUETE A C B D J E F V G H K M Pieza L Descripción R N U P S Cantidad Pieza T W Descripción X Cantidad A Panel superior 1 M Moldura superior 1 B Repisa multimedia 1 N Panel trasero lateral 2 C Panel de base 1 P Panel interior derecho 1 D Panel trasero superior 1 R Repisa ajustable 2 E Panel lateral izquierdo 1 S Panel frontal izquierdo 1 F Panel lateral derecho 1 T Panel frontal derecho 1 G Panel interi
Ensamblaje de las patas de soporte 1 Unión U □□ Localice el panel de base (C) y colóquelo sobre una superficie suave para proteger el acabado. Alinee e inserte el conector largo (CC) en las patas de soporte (U) dentro de los orificios no roscados en el centro del panel de base (C). C □□ Una las patas de soporte (U) al panel de base (C) girando dos pernos (AA) en el sentido de las agujas del reloj a través de los conectores largos (CC). No apriete los pernos (AA) en exceso ya que podría dañarlos.
Ensamblaje (continuación) de los paneles interiores 3 Colocación □□ Inserte cuatro espigas de madera (DD) en los orificios no roscados en la moldura superior (M). P □□ Alinee las cuatro espigas de madera (DD) en la moldura superior (M) con los orificios no roscados en las piezas de las molduras izquierda y derecha (P y G). □□ Empuje firmemente hasta que estén al ras.
Ensamblaje (continuación) de la base 5 Colocación CC AA DD □□ Inserte seis espigas de madera (DD) en los orificios no roscados en el ensamblaje de la repisa multimedia. □□ Alinee las espigas de madera (DD) con los orificios no roscados en el panel de base (C). Presione los paneles a la vez hasta que estén al ras.
Ensamblaje (continuación) 7 Unión de los paneles laterales CC AA DD □□ Inserte ocho espigas de madera (DD) en los orificios no roscados en los laterales de la repisa multimedia (B) y el panel de base (C). □□ Alinee las espigas de madera (DD) en los laterales de la repisa multimedia (B) y el panel de base (C) con los orificios no roscados en los paneles laterales izquierdo y derecho (E y F).
Ensamblaje (continuación) 9 P reparación del panel superior LL □□ Localice el panel superior (A) y colóquelo en una superficie suave con la cara con acabado hacia abajo para proteger el acabado. □□ Inserte cuatro pasadores de cerradura de leva largos (MM) en los orificios roscados en los laterales del panel superior (A) girando en el sentido de las agujas del reloj. No dañe los pasadores de cerraduras de leva largos (MM) apretándolos en exceso.
Ensamblaje (continuación) olocación de los paneles 11 C traseros □□ Localice los paneles traseros (D y N) y alinéelos a la parte trasera de la consola multimedia con el acabado mirando hacia adentro. D □□ Inserte y apriete veintiocho tornillos (FF) para unir los paneles traseros (D y N) a la consola multimedia. N □□ No dañe los tornillos (FF) apretándolos demasiado.
Ensamblaje (continuación) 13 I nserción de las repisas HH □□ Localice las cuatro repisas (R) y colóquelas sobre una superficie suave para proteger el acabado. □□ Inserte las 8 clavijas de repisa (HH) en el interior de los paneles laterales (E, F, G y P). Asegúrese de insertar las clavijas paralelas entre sí para asegurar que las repisas queden niveladas. R □□ Inserte las repisas (R) sobre las clavijas de repisa (HH) dejando visibles las caras con acabado.
Cuidado y limpieza □□ Siempre apague el calefactor y desconecte el cable eléctrico del tomacorriente antes de limpiarlo. □□ La limpieza del panel de control, localizado en la esquina superior derecha de la chimenea, debe hacerse usando solamente un paño suave, ligeramente humedecido en agua (de ser necesario, se puede agregar una pequeña cantidad de jabón de platos al agua) y secarse usando un paño suave limpio y seco.
Piezas de servicio (continuación) Pieza Descripción Cant.
Resolución de fallas Si tiene preguntas respecto al producto, llame a Servicio al Cliente de Home Decorators al 1-800-986-3460, 8 a.m. - 7 p.m., Hora del Este de lunes a viernes, 9 a.m. - 6 p.m., Hora del Este de Sábado Problema Causa posible La chimenea no funciona. □□ La chimenea no está enchufada. Solution □□ Un disyuntor de circuito se ha activado o un fusible ha explotado. □□ El interruptor ON/OFF está defectuoso. La luz de energía está encendida pero el efecto de la llama no es visible.
¿Preguntas, problemas o partes faltantes? Antes de regresar a la tienda, llame al servicio de atención al cliente de Home Decorators Collection 8 a.m. - 7 p.m., Hora del Este de lunes a viernes, 9 a.m. - 6 p.m., Hora del Este de Sábado 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Guarde este manual para futuras referencias. Fabricado por: GHP Group, Inc. • 6440 W. Howard St.