Use and Care Manual

Assembly (continued)

Attach the Hinge Bracket (H-1) to the Right Side Panel (F).

Use a Phillips head screwdriver to tighten the Flathead

Screw (JJ) through the pre-drilled holes.

Repeat for the Left Side Panel (E).

Attach the Center Foot (Q) to the Base (A).

Insert Small Bolts (DD) through the Plastic Connector 2 Hole

Block (LL) and into the Base (A) and tighten.

Insert Wood Dowels (CC) into the holes on the

Base (A).

Push the Left Foot (O) and Right Foot (P) snug to the

Hearth/Base (A).

Insert Large Bolts (AA) through the Washers (BB) and

into the pre-drilled holes in the Base (A) and tighten.

Attaching the hinges

Installing the center foot

Installing the feet

H-1