Item #1000 545 719, 1000 321 404, 1000 707 707 Model #26650, 26655, 26656 UL Model #56-ATR USE AND CARE GUIDE ALTURA 56-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS To view an instructional video on how to install this product: 1. Go to www.homedepot.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 12 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser.
Pre-installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-installation (continued) PACKAGE CONTENTS A F B G B C H D I E Part Description Quantity A Slide-on mounting bracket (inside canopy) 1 B Ball/downrod assembly C Part Description Quantity F Decorative motor collar cover 1 G Blade 5 1 H Switch cup adaptor 1 Canopy with canopy ring attached 1 I Remote control (battery included) 1 D Fan-motor assembly 1 E Switch cup (receiver included) 1 IMPORTANT: This product and/or components are governed by one or more of the foll
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support of 50 lb (22.7 kg) or less” and use the screws provided with the outlet box An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly - Standard Ceiling Mount 1 2 Preparing for mounting □□ Remove the canopy ring (L) from the canopy (C) by turning □□ □□ Routing the wires □□ Route the wires exiting the top of the fan motor (D) into the decorative motor collar cover (F) and through the canopy ring (L). the ring to the right until it unlocks. Remove the mounting bracket (A) from the canopy (C) by loosening the two screws (HH) located in the “L shaped” slots Remove and save the two non-slotted screws (SS) in the round holes.
Assembly - Hanging the Fan 1 2 Attaching the fan to the electrical box □□ Carefully lift the fan motor assembly (D) up to the slide-on WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support of 50 lb (22.7 kg) or less” and use the screws provided with the outlet box. mounting bracket (A). □□ Seat the hanger ball portion of the ball/downrod assembly (B) in the mounting bracket (A) socket.
Assembly - Hanging the Fan (continued) 3 Making the electrical connection Outlet box in the ceiling (OO) WARNING: Each wire not supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use. Black Black IMPORTANT: Use the plastic wire connectors (BB) supplied with your fan.
Assembly - Hanging the Fan (continued) 4 5 Wrapping the extra wire Mounting the fan-motor assembly (standard mount) WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball. Failure to properly seat the tab in the groove could cause damage to the wiring. NOTE: Follow this step ONLY if you did not cut the extra length off from the wires coming from the ceiling fan.
Assembly - Hanging the Fan (continued) 6 Attaching the fan blades □□ Attach blade (G) to blade bracket (J) using the decorative □□ □□ nuts (CC) and blade attachment screws (AA) provided. Insert a blade attachment screw (AA) through a hole in the blade (G) and blade bracket (J) into a decorative nut (CC). Repeat for the two remaining holes in the blade (G). Tighten each blade attachment screw (AA) securely. Repeat these steps for the remaining blades.
Assembly - Attaching the accessories (continued) 2 Attaching the switch cup CAUTION: To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan before installing the switch cup. IMPORTANT: It is critical to attach the switch cup using the quick connector. The fan will not operate unless the switch cup is connected to the fan. UU □□ Remove one screw (UU) from the switch cup adaptor (H). □□ □□ □□ D Loosen but do not remove the other two screws (UU).
Operating Your Fan and Remote Control (continued) Setting the code on the remote control NOTE: This remote is equipped with 16 code combinations. To prevent possible interference from or to other remote units, such as garage door openers, car alarms, or security systems, simply change the combination code. The code switch marked ON/DIM is for dimming control of the lights: Set the code switch to ON to allow for no dimming of the lights such as for fluorescent bulbs.
Operating Your Fan and Remote Control Operating the fan Light/Dimmer button (XX) = Press and release the button immediately to turn on or turn off the light. Press and hold the button to dim or brighten the light to the desired level and then release. (For tungsten bulbs only and down light function, turn the switch to “DIM”.
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Artículo Núm. 1000 545 719, 1000 321 404, 1000 707 707 Modelo Núm. 26650, 26655, 26656 Modelo Núm. 56-ATR aprobado por UL GUÍA DE USO Y MANTENIMIENTO VENTILADOR DE TECHO ALTURA, DE 1,42 M ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Home Decorators Collection, de lunes a viernes entre 8 a.m. y 6 p.m. (hora estándar del Este). 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Para ver un video instructivo sobre cómo instalar este producto: 1. Ir a www.
Tabla de Contenido Tabla de Contenido.............................................................. 2 Ensamblaje............................................................................ 7 Información de Seguridad................................................... 2 Funcionamiento.................................................................. 13 Garantía................................................................................. 3 Mantenimiento y Limpieza......................................
Garantía El proveedor garantiza de por vida, a partir de la fecha en que el comprador original lo adquiere, que el motor del ventilador no presenta defectos de fabricación ni de material al momento en que es enviado desde la fábrica.
Pre-instalación (continuación) HERRAJES INCLUIDOS NOTA: No se muestra el tamaño real de los herrajes.
Pre-instalación (continuación) CONTENIDO DEL PAQUETE A F B G B C H D I E Pieza Descripción Cantidad A Soporte deslizante de montaje (dentro de la cubierta) 1 B Ensamblaje de tubo bajante/bola C Pieza Descripción Cantidad F Cubierta decorativa del collarín del motor 1 1 G Aspa 5 Cubierta con aro incorporado 1 H Adaptador de la caja del interruptor 1 D Ensamblaje del motor del ventilador 1 I Control remoto (batería incluida) 1 E Caja del interruptor (receptor incluido)
Instalación OPCIONES DE MONTAJE NOTA:Tal vez necesites un tubo bajante más largo para mantener la altura mínima adecuada de las aspas, al instalar el ventilador en un techo inclinado. El ángulo máximo permitido es de 30º de la posición horizontal.
Ensamblaje - Montaje Estándar en Techo 1 2 Preparación para el montaje □□ Retira el aro (L) de la cubierta (C), girándolo hacia la derecha □□ □□ Disposición de los cables □□ Inserta los cables que salen por la parte superior del motor del ventilador (D) en la cubierta decorativa del collarín del motor (F) y a través del aro de la cubierta (L). hasta soltarlo. Retira el soporte de montaje (A) de la cubierta (C) aflojando los dos tornillos de la cubierta (HH) ubicados en las ranuras en forma de “L”.
Ensamblaje - Cómo Colgar el Ventilador 1 2 Cómo conectar el ventilador con la caja eléctrica □□ Con cuidado alza el ensamblaje del motor del ventilador (D) ADVERTENCIA: Para reducir el riesgo de incendio, descarga eléctrica o lesiones personales, monta el ventilador sobre una caja eléctrica marcada como “aprobada como soporte de ventiladores de 50 lb (22,7 kg) o menos”, y usa los tornillos de montaje que vienen con la misma. hasta el soporte de montaje deslizante (A).
Ensamblaje — Cómo Colgar el Ventilador (continuación) 3 Cómo hacer las conexiones eléctricas ADVERTENCIA: Cada cable no suministrado con este ventilador está diseñado para aceptar un máximo de un solo circuito eléctrico doméstico de calibre 12 y dos cables del ventilador. Si tienes un cableado doméstico superior a calibre 12 o más de un cable doméstico para conectar al cableado del ventilador, consulta a un electricista para conocer el tamaño adecuado de las tuercas para cables a usar.
Ensamblaje - Cómo colgar el ventilador (continuación) 4 5 Cómo enrollar el cable sobrante NOTA: Sigue estos pasos SOLAMENTE si no cortaste el cable sobrante del ventilador de techo. Cómo montar el ensamblaje del motor del ventilador (montaje estándar) ADVERTENCIA: Cuando uses el ensamblaje del tubo bajante/ bola estándar, la pestaña en el aro en la parte inferior del soporte de montaje debe encajar en la ranura de la bola de soporte.
Ensamblaje — Cómo Colgar el Ventilador (continuación) 6 Cómo montar las aspas del ventilador □□ Monta el aspa (G) al soporte de la misma (J) usando las □□ □□ AA tuercas decorativas (CC) y los tornillos para montar las aspas (AA) provistos. Inserta un tornillo para montar las aspas (AA) a través del orificio del aspa (G) y el soporte de la misma (J) en una tuerca decorativa (CC). Repite para los otros dos orificios restantes del aspa (G). Aprieta firmemente cada tornillo para montar las aspas (AA).
Ensamblaje — Cómo montar los accesorios 2 Cómo instalar la caja del interruptor PRECAUCIÓN: Para disminuir el riesgo de descarga eléctrica, desconecta el circuito de energía del ventilador antes de instalar la caja del interruptor. IMPORTANTE: Si después de este paso, usted decide comprobar que las conexiones eléctricas han sido un éxito, es fundamental para fijar el kit de la luz utilizando el conector rápido antes de la prueba.
Cómo Usar el Ventilador y el Control Remoto Control Remoto - Tu ventilador está equipado con un control remoto que controla la velocidad y las luces de tu ventilador de techo. Para más información sobre cómo instalar el control remoto, consulta las instrucciones del control remoto y revisa los componentes incluidos con éste. Las configuraciones de velocidad para clima cálido o frío dependen de factores como el tamaño de la habitación, la altura del techo, cantidad de ventiladores y demás.
Cómo Usar el Ventilador y el Control Remoto Proceso de memorización Cómo usar el ventilador Botón Luz/Regulador (XX) = Oprime y suelta el botón inmediatamente para encender o apagar la luz. Mantén presionado el botón para atenuar o aumentar la luz en la intensidad deseada y luego suéltalo. (Para la función de bajar las luces y lámparas de tungsteno solamente, coloca el interruptor en "DIM").
Mantenimiento y Limpieza ADVERTENCIA: Asegúrate de que la corriente esté apagada antes de limpiar el ventilador. □□ Debido al movimiento natural del ventilador, algunas conexiones pueden aflojarse. Revisa las conexiones de soporte, los soportes y accesorios de aspas dos veces al año. Verifica que estén bien asegurados. No es necesario desmontar el ventilador del techo. □□ Limpia tu ventilador con frecuencia para que luzca como nuevo a pesar de los años.
Este equipo ha sido probado y se ha verificado que cumple con los límites para un dispositivo digital clase B, conforme a la sección 15 de las reglas de la FCC. Estos límites se han diseñado para proporcionar una protección razonable contra la interferencia perjudicial en una instalación residencial. Este equipo genera, utiliza y puede irradiar energía de radiofrecuencia y, si no se instala y se usa de acuerdo con las instrucciones, puede causar interferencia perjudicial a las comunicaciones de radio.