Use and Care Manual

Installing the inner side panels

□ Lay the base (P) on a at, even surface. Insert four dowels

(CC) into the predrilled holes in the base (P) as shown. Slip

the left inner panel (K) and the right inner panel (L) over

the dowels (CC) until snug. Insert two dowels (CC) into the

predrilled holes in the left and right top edges of the left and

right inner panels (K & L) as shown. Spread the inner panels

apart just enough to slip the front rail (M) over the dowels (CC)

extending from the inner panels. Secure the left and right

inner panels (K & L) using bolts (AA) and washers (BB).

Installation

Attaching the outer side panels

□ Insert two dowels (CC) into the predrilled holes in the

base (P) as shown. Slip the left outer panel (H) over

the dowels (CC) until snug. Secure using bolts (AA) and

washers (BB). Repeat using the right outer panel (J).

Attaching the media shelf

□ Insert eight dowels (CC) into the predrilled holes in the

top edges of the cabinet assembly. Secure using bolts

(AA) and washers (BB) inserted from underneath the

glue blocks as shown.

Afxing the lower back panels

□ With the back of the cabinet assembly facing you, attach

each of the lower back panels (N) to each side of the

cabinet assembly using screws (EE).