Use and Care Manual

HOMEDEPOT.COM/HDC

Please contact 1-800-986-3460 for further assistance.

Installing the doors

□ Lay the left and right doors (R & S) face down on a smooth,

clean surface. Attach the hinges (FF) using the screws

included with the hinges (FF). Starting with the left door (R),

insert the male ends of the installed hinges into the female

ends on the inside of the left cabinet assembly as shown.

Level the door (R) using the leveling screw, then tighten the

set screw as shown. Attach a handle (GG) using the screw

included on the handle (GG). Repeat using the right door (S)

and remaining hinges (FF) and handle (GG).

Installation (continued)

Attaching the side panels and

support

□ Insert six dowels (CC) into the predrilled holes in the top of

the base cabinet (G). Slip the left side panel (B) over the

dowels on the left side of the base cabinet (G) and secure

with bolts (AA) inserted through washers (BB). Repeat on

the right side with the right side panel (C). Slip the back

panel support (E) over the remaining dowels until snug.

Attaching the top panel

□ Insert four dowels (CC) into the predrilled holes in the

top edges of the assembly. Slip the top panel (A) over

the dowels and secure from underneath the panel with

the bolts (AA) inserted through washers (BB) as shown.

Securing the top panel

□ Tighten the bolt (AA) inserted through the washer (BB)

and the predrilled hole in the back of the support.

Secure another bolt (AA) inserted through a washer (BB)

from underneath the top panel of the base cabinet (G) as

shown.