Installation Guide
Maintenance
Care and Cleaning
□ Keep the hairpin legs away from the direct sunlight.
□ Avoid exposing the hairpin legs to extreme temperatures by installing away from heat and air vents.
□ Periodically make sure that the screws are fully tightened.
□ Dust frequently with a clean, soft and dry cloth.
□ Wipe away any water or liquid spills on the hairpin legs immediately with a clean, soft and dry cloth.
□ Never use harsh chemicals on your product as this may damage the metal.
6
Installation – [Four leg option]
□ Install each hairpin leg matching each corner of the leg into
each corner of the vanity. Provide sufcient protection on the
oor to protect the vanity from damage.
□ Tilt the vanity backwards and position the hairpin legs (A),
aligned over the pre-drilled holes. Attach hairpin legs to the
vanity using the 4 x 16mm screws (not included).
□ Ensure all the screws are tightened properly. With assistance,
turn the vanity upright to rest on its legs.
□ Place the vanity base on the desired location and mark the felt
pad location on the oor. Remove the vanity and stick the hairpin
leg felt pad (B) to the oor. Place the vanity on the felt pad (B).
Attaching the hairpin legs
1
A
B