Instructions / Assembly

6
Installation (continued)
3
Making the electrical
connections
4
Installing the bulbs
GROUND WIRE
BLACK WIRE
WHITE WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSEFROM FIXTURE
FROM FIXTURE
FROM FIXTURE
TRANSPARENT WIRE
MARKED WITHOUT WORDS
TRANSPARENT WIRE
MARKED WITH WORDS
GROUND WIRE
Connect the ground wire from the branch circuit
to the ground screw (CC) on the crossbar (DD).
Connect the pendant cable as follows:
Push all slack fixture wire through the canopy
loop (KK) and into the outlet box. Trim the
excess fixture wire, leaving a minimum of 6 in.
hanging out of the outlet box.
NOTE: Always use wire nuts (AA) or marrettes (included) to
connect wires, and push all excess wires and connections back
into the outlet box.
Attach the canopy (FF) to the outlet box, and
secure it with the loop ring (LL).
Install four 60W max. B10 bulbs (not included) in
each socket of the fixture body (A).
A
AA
DD
CC
FF
KK
LL