Instructions / Assembly

5
Installation
1
Installing the xture body
Unravel the supply power and ground wires and
pass them through the center holes of the stem
(KK) into the coupling at the center of the
Then place the bushing (B) over the stem (KK).
WWW.HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
on a clean surface．
2
Installing the crossbar
Remove the crossbar (EE) from the
canopy (C) by loosening the two ball nuts (GG)
on the canopy (C).
WARNING: To reduce the risk of electrical shock, turn the
power off at the main fuse box before installation.
Attach the crossbar (EE) to the junction
box (not included) with the outlet box screws (BB).
EE
BB
GG
C
3
Connecting the wires
wire, leaving a minimum of 6 in. hanging out of
the outlet box.
NOTE: Always use wire nuts (AA) (included) to connect
wires and push all excess wires and connections back
into the junction box.
Connect the ground wire from the branch circuit
to the ground screw (CC) on the crossbar (EE).
Connect the wires as follows:
AA
CC
C
EE
WHITE WIRE WHITE WIRE
FROM FIXTURE
FROM FIXTURE
FROM CANOPY
GROUND WIRE
BLACK WIRE BLACK WIRE
GROUND WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
HH
II
JJ
KK
B
FF
C
plain washer (JJ) and lock washer (II). Then secure
Place the flat collar (FF), followed by the canopy (C),
this assembly in place using the hex nut (HH).