Instructions / Assembly

Assembly — Hanging the Fan

Attaching the mounting bracket to

the electrical box

□

Secure the mounting bracket (B) to the ceiling outlet box

with the screws and washers provided with your outlet

box.

WARNING: To reduce the risk of ﬁre, electric shock, or

other personal injury, mount the fan only to an outlet box or

supporting system marked acceptable for fan support and

use the mounting screws provided with the outlet box.

□

Loosen the two fan motor assembly coupling set screws

(JJ) from the fan motor assembly (G) coupling.

□

Remove the hitch pin (GG) and lock pin (HH) from the

downrod (E). Remove the hanger ball (D) from the

downrod (E) by loosening the hanger ball set screw

(II), and removing the cross pin (FF), then sliding

the hanger ball (D) off of the downrod (E).

□

Carefully feed the fan wires up through the downrod (E).

Thread the downrod (E) into the fan motor assembly (G)

coupling. Line up the holes and replace the lock

pin (HH) and the hitch pin (GG). Tighten the fan motor

assembly coupling set screws (JJ).

Attaching the downrod to the

fan motor assembly

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986 3460 for further assistance.