Instructions / Assembly

9
Assembly — Hanging the Fan (continued)
5
Making the electrical connections
WARNING: To avoid possible electrical shock, ensure the
electricity is turned off at the circuit breaker or main fuse box
before wiring.
WARNING: Check to see that all connections are tight,
including the ground, and that no bare wire is visible at the
wire nuts, except for the ground wire.
Follow the steps below to connect the fan to your house
supply wires. Secure the wire nuts (EE ) supplied with your
fan by wrapping the connections with electrical tape.
□ Connect the black (hot) wire from the ceiling to the
black wire from the fan motor assembly (G).
□ Connect the white (neutral) wire from the ceiling to
the white wire from the fan motor assembly (G).
□ Connect the ground conductor of the 120-volt supply
(this may be a bare wire or a wire with green colored
insulation) to the green ground lead(s) of the fan.
When using standard ceiling mounting, there are two
green grounding leads: one from the mounting
bracket (B) and one from the hanger ball (D).
□ Secure the wire connections with plastic wire nuts
(EE ) provided with the electrical hardware.
□ After connecting the wires, spread them apart so that
the green and white wires are on one side of the
outlet box (1) and the black and blue wires are on the
other side. Carefully tuck the wire connections up
into the outlet box (1).
EE (x3)
1
B
G
D
Black White Green
Black White Green
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986 3460 for further assistance.