Instructions / Assembly

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Press the Uplights button on the remote control to change

the uplight between the four settings: white, blue,

white/blue, auto-cycling and OFF.

Operation

Operation (continued)

Push the Power button to supply power to all

functions of the replace and put the insert in a

standby mode.

Push the Power button again to turn off all functions.

Press the Timer button to cycle through the ten timer

settings (30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H,

7H, 8H and 9H) and the OFF setting.

Powering the Fireplace Adjusting the Spectrare Flame

Adjusting the Heater

Setting the Timer

NOTE:

To change between °F and °C press and hold the

Heater button on the control panel for 3 seconds.

NOTE:

Holding the Power button on the control panel for

10 seconds will disable the heater function.

NOTE:

All previous settings are held in memory, so the

next time you power up the replace, the unit will turn on

with the same settings.

There are six brightness levels that can be selected.

Settings 6 - 4 decrease in Spectrare brightness.

Settings 3 - 1 decrease in Amber only ame brightness.

Adjusting the Sidelights

Press the Sidelights button on the remote control to change

the sidelight between the four settings: amber,

blue, blue/amber, auto-cycling and OFF.

Adjusting the Uplights

To set the thermostat use the Heater button on the control

panel to select the desired temperature.

The thermostat setting range is 62°F - 82°F or 17°C - 27°C

or always ON.

The thermostat is adjustable by 2°F or 1°C increments by

pressing the Up or Down “ “ buttons on the remote

control.