Installation Guide

11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Attaching the Fan Blades
Attaching the fan blades
10
□ Insert the blade (F) through the slot cut-off in the ywheel.
□ Align the three screw holes in the blade with the screw
holes in the ywheel and secure with the blade attachment
screws (AA).
□ Repeat for the remaining blades (F).
AA
F
E
Attaching the switch cup adaptor
11
□ Remove one screw (EE) from the black bracket below the
fan motor assembly (E). Loosen, but do not remove the
other two screws.
□ Align the key hole slots in the switch cup adaptor (G) with
the two screws in the black bracket.
□ Turn the switch cup adaptor (G) clockwise until the two
screws are situated in the narrow end of the keyholes.
□ Re-install the one screw (EE) that was removed in rst step.
Tighten all three screws rmly.
EE
E
G
Attaching the light kit
12
□ Remove the three screws (FF) from the switch cup adaptor
(G) below the fan motor assembly (E).
□ Connect the wires from the light kit to the blue and white
wires from the switch cup adaptor (G).
□ Position switch cup (H) on the switch cup adaptor (G) below
the fan motor assembly (E) and align the three holes in the
switch cup adaptor (G).
□ Re-install the three screws removed in rst step in this
section to secure the switch cup (H).
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
E
FF
H
G