Installation Guide
Table Of Contents
13
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation
Remote Control - Your fan is equipped with a remote control to
operate the speed and lights of your new ceiling fan.
The appropriate speed settings for warm or cool weather depend
on factors such as the room size, ceiling height, and number of
fans.
The fan is shipped from the factory with the reversing switch
positioned to circulate air downward. If airow is desired in the
opposite direction, turn your fan off and wait for the blades to stop
turning. Slide the reversing switch (located at the top of the motor
housing) to the opposite position, and turn the fan on again. The fan
blades will turn in the opposite direction and reverse the airow.
Operating the fan
“4” button = Fourth speed (high)
“3” button = Third speed
“2” button = Second speed
“1” button = First speed (low)
Power button (T): Press to turn the fan off.
Light button (U): Press and release immediately to turn the light on
or off. Press and hold to dim or brighten the bulbs to the desired level
and then release (the dimmer function is for Tungsten bulbs only).
Cool weather - (Reverse) An upward airow moves warm air off
of the ceiling. This allows you to set your heating unit on a cooler
setting without affecting your comfort.
Warm weather - (Forward) A downward airow creates a cooling
effect. This allows you to set your air conditioner on a warmer
setting without affecting your comfort.
NOTE: The reverse switch is located at the top of motor housing.
Shut the fan off and wait until the blades have completely stopped
before ipping the switch to reverse the direction of your ceiling
fan.
U
T
1
2
3
4