Installation Guide

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly - Attaching the accessories

Attaching the fan blades

Attaching the switch cup adaptor

□ Attach blade (F) to blade bracket (J) using the decorative

nuts (CC) and blade attachment screws (AA) provided. Insert

a blade attachment screw (AA) through a hole in the blade

(F) and the blade bracket (J) and into the decorative nut (CC).

Repeat for the two remaining holes in the blade (F).

□ Tighten each screw (AA) securely.

□ Repeat these steps for the remaining blades.

□ Remove one screw (QQ) from the black bracket below the

fan motor assembly (E). Loosen, but do not remove the

other two screws (RR).

□ Align the key hole slots in the switch cup adaptor (G) with

the two screws (RR) in the black bracket.

□ Turn the switch cup adaptor (G) clockwise until the two

screws (RR) are situated in the narrow end of the keyholes.

□ Re-install the one screw (QQ) that was removed in rst

step. Tighten all three screws rmly.

Assembly - Hanging the Fan (continued)

Attaching the switch cup

□ Remove one screw (UU) from the switch cup adaptor (G).

Loosen but do not remove the other two screws (UU).

□ Connect the molded adaptor plug from switch cup (H) with

the molded adaptor of the fan motor assembly (E).

□ Aligning the “L” shape holes on the switch cup (H) with the

screws on the switch cup adaptor (G). Turn the switch cup

(H) to hold it in position.

□ Install the other screw (UU) that was removed in the rst

step. Tighten all three screws (UU) securely.

□ Attach the pull chain extensions (DD) provided to the fan

pull chain.

CAUTION: To reduce the risk of electric shock, disconnect

the electrical supply circuit to the fan before installing the

switch cup.

IMPORTANT: It is critical to attach the switch cup using the

quick connector. The fan will not operate unless the switch

cup is connected to the fan.