Item #0000 000 000 Model #54662 USE AND CARE GUIDE TIDAL BREEZE LED 56 INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986 3460 HOMEDEPOT.
Table of Contents Table of Contents ..........................................................2 Safety Information .........................................................3 Warranty .........................................................................4 Pre-installation .............................................................. 4 Specifications .......................................................................... 4 Tools Required ..................................................................
Safety Information □ Read and save these instructions. □ To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning. □ All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999” and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. □ The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 lbs.
Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two year after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE:Hardware shown to actual size unless noted otherwise in the table below. AA GG DD HH EE BB II CC Part JJ FF Quantity Description AA Blade Screw (1/4 in. x 15.8mm) 13 BB Up Housing Screw (1/4 in. x 9.
Pre-Installation (continued) PACKAGE CONTENTS D J E K F A G L H B M C Quantity 3 Part I Description Fan motor assembly Quantity 1 Mounting bracket 1 J 14W LED assembly 1 C Canopy 1 K D E Canopy cover Hanger ball (preassembled) 1 1 L M Receiver Remote control 1 1 Remote control holder 1 F Downrod (preassembled) 1 N 12V Battery 1 G Couping cover 1 H Up housing 1 Part Description N I A Blade B 6
Installation MOUNTING OPTIONS WARNING:To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked acceptable for fan support using the screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly -Attaching the Fan Blades 1 □ Fastening the blades to the fan motor assembly Align the 4 holes from the blade(A) to the fan motor assembly(I). Secure blade with 4 blade screws(AA) provided. Follow the same process for the remaining two blades(A).
Assembly -Attaching the Up Housing 2 □ Fastening the up housing to the fan motor assembly Align holes in the up housing(H) and the fan motor assembly(I), and secure with the up housing screw（BB）. Ensure all the up housing screws(BB) are tightened. BB H I 9 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Assembly -Hanging the Fan 3 WARNING: To reduce the risk of fire, electric shock, or other personal injury, mount the fan only to an outlet box or supporting system marked acceptable for fan support and use the mounting screws provided with the outlet box. □ □ Attaching the downrod to the fan motor assembly 4 Attaching the mounting bracket to the electrical box Place the slots from mounting bracket (B) over the two screws provided with the outlet box.
Assembly -Hanging the Fan (continued) 5 □ Attaching the coupling cover, canopy cover, and canopy to the downrod Hanging the fan motor assembly from the mounting bracket 6 Slip the coupling cover (G), canopy cover (D), and canopy (C) onto the downrod (F). Carefully reinstall the hanger ball (E) onto the downrod (F), and ensure that the cross pin (EE) is in the correct position, the set screws (HH) are tight, and the wires are not twisted.
Assembly -Hanging the Fan (continued) 7 Preparing the receiver and remote control WARNING: To avoid possible electrical shock, ensure the electricity is turned off at the main fuse box before wiring. CAUTION: Do not use with a wall light dimmer switch. NOTE: If you feel you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.
Assembly -Hanging the Fan (continued) 8 Making the electrical connections 1 WARNING: To avoid possible electrical shock, ensure the electricity is turned off at the circuit breaker or main fuse box before wiring. WARNING: Check to see that all connections are tight, including the ground, and that no bare wire is visible at the wire nuts, except for the ground wire. Black White Black White Follow the steps below to connect the fan to your house supply wires.
Assembly -Hanging the Fan (continued) 9 Securing the fan motor assembly to the mounting bracket □ Remove one screw (JJ) from the mounting bracket (B) and loosen the other screw (JJ) approximately 1/4 turn. □ Carefully raise the canopy (C) up to the mounting bracket (B), and ensure the loosened screw (JJ) is inserted into the key hole on the canopy (C). Rotate the canopy (C) clockwise.
Assembly -Installing the Light Kit 10 Attaching the LED assembly to the fan motor assembly □ While holding the LED assembly(J) under your fan, firmly snap the wire connection plugs(LL) together. □ Attach the LED assembly(J) to the switch box(MM) by twisting tightly NOTE: This is an integrated LED light kit assembly and cannot be disassembled to prevent electronic shock. MM LL J 15 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Operation REMOTE CONTROL OPERATING INSTRUCTIONS Install a 12V battery (N) into the remote control (L). To prevent damage to the remote control, remove the battery if not used for long periods of time. L WARNING: Do not short-circuit, disassemble, heat up, connect improperly, or dispose of used batteries in re. Do not recharge or mix batteries with used or other battery types. Immediately remove used batteries. Restore power to the ceiling fan and test for proper operation.
Operation (continued) INSTALLING THE REMOTE CONTROL HOLDER □ Attach the remote control holder (M) with the two remote control holder mounting screws (CC). M CC Care and Cleaning Do □ Do not Check the support connections, brackets, and blade attachments twice a year. Ensure they are secure. Because of the fan’s natural movement, some connections may become loose over time. It is not necessary to remove the fan from the ceiling. □ Clean your fan periodically.
Troubleshooting WARNING: Ensure the power is off at the electrical panel box before you attempt any repairs. Refer to the section “Making the Electrical Connections” on page 12. Problem The fan will not start. The fan sounds noisy. The remote control is not working. Solution □ Check main and branch circuit fuses or breakers. □ Check line wire connections to the fan and switch wire connections in the switch housing.
Service Parts H AA FF BB GG I J A K CC HH B C DD II EE JJ D L E F G Part M N Description Part Description A Blade AA Blade Screw (1/4 in. x 15.8mm) B Mounting bracket BB Up Housing Screw (1/4 in. x 9.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986 3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
