Item #xxxx xxx xxx Model #59918, 59919 UL Model 54-INDO USE AND CARE GUIDE INDIGO 54-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this ceiling fan.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 13 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS A G H B C I D J E K L F Part Description Quantity Part G Description Light kit fitter assembly Quantity A Slide-on mounting bracket (inside canopy) 1 1 H Shatter resistant shade 1 B Ball/downrod assembly 1 I Receiver 1 C Canopy 1 J Remote control 1 D Decorative motor collar cover 1 K Extension lead wire 1 E Fan-motor assembly 1 L Battery 1 F Blade 5 IMPORTANT: This product and/or components are governed by one or
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. (15.9 kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly - Standard Ceiling Mount 1 2 Preparing for mounting □□ Remove the mounting bracket (A) from the canopy (C) □□ □□ Routing the wires exiting the top of the fan motor assembly (E) through the center of the canopy ring (FF). Make sure the slots on the canopy ring (FF) are on top. □□ Insert the balldownrod (B) through the canopy (C) and slide the decorative motor collar cover (D) onto the end of the ball/ downrod (B). Make sure the slots on the canopy (C) are on top.
Assembly - Hanging the Fan 1 2 Attaching the fan to the electrical box □□ Carefully lift the fan-motor assembly (E) up to the slide-on WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. 15.9 kg) or less”, and use screws provided with the outlet box. mounting bracket (A).
Assembly - Hanging the Fan (continued) 4 Setting the code on the remote control and receiver 2 4 3 4 YKO ZZ □□ Remove the remote control (J) battery cover by pressing □□ YKO 3 2 L ON 1 NOTE: The battery will weaken with age and should be replaced before leaking takes place as this will damage the hand unit. Dispose of used battery properly and keep the battery out of the reach of children. □□ ON 1 NOTE: The frequencies on your receiver and hand unit have been preset at the factory.
Assembly - Hanging the Fan (continued) 6 7 Wiring the receiver to the household wiring WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. Wiring the fan to the receiver NOTE: The fan comes with 12 in. lead wires for use with the provided 6 in. ball downrod assembly (B).
Assembly - Hanging the Fan (continued) 8 Mounting the fan-motor assembly (standard mount) A II □□ Align the locking slots of the canopy (C) with the two □□ □□ B screws (II) in the mounting bracket (A). Push up to engage the slots and turn clockwise to lock in place. Firmly tighten the two mounting screws (II). Install the two canopy screws (HH)(saved from Assembly Step 1 “Prepairing for mounting”) into the holes in the canopy (C) and tighten firmly.
Assembly - Attaching the Accessories 1 Attaching the light kit fitter assembly □□ Connect the wires from the light kit fitter assembly (I) to □□ the wires from the fan motor assembly (E) by connecting the molded adaptor plugs together. Carefully tuck all wires and splices into the switch cup and connect the safety cable (SS) from the light kit assembly (I) to the hook from motor assembly (E).
Operating Your Fan and Remote Control Remote Control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan. Speed setting for warm or cool weather depends on factors such as the room size, ceiling height, number of fans and so on. A. Warm weather YY The fan is shipped from the factory with the reversing switch (YY) positioned to circulate air downward.
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
