Use and Care Guide

Assembly - Attaching the Accessories

Attaching the light kit tter assembly

□ Connect the wires from the light kit tter assembly (I) to

the wires from the fan motor assembly (E) by connecting

the molded adaptor plugs together. Carefully tuck all wires

and splices into the switch cup and connect the safety

cable (SS) from the light kit assembly (I) to the hook from

motor assembly (E).

□ Push the light kit tter assembly (G) up to the to motor

assembly (E) by aligning the magnet part of motor

assembly (E) till it is secure.

Installing the shatter resistant shade

□ Place the shatter resistant shade (H) into the light kit

assembly (G), aligning the three at areas on the top of the

ange of the shatter resistant shade (H) with the three raised

dimples in the light kit assembly (G). Turn the shatter resistant

shade clockwise until it stops.

WARNING: Do not overtighten when installing the shatter

resistant shade into the light kit. Allow the glass shade to cool

completely before removing.