Item #xxxx xxx xxx Model #59299 UL Model 56-HARB USE AND CARE GUIDE HARBOR ISLE 56-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this ceiling fan.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 13 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS A F B G H C I J D K E L M N Part Description Quantity A Slide-on mounting bracket (inside canopy) 1 B Ball/downrod assembly 1 C Canopy 1 D Decorative motor collar cover 1 E Fan-motor assembly 1 Part IMPORTANT: This product and/or components are governed by one or more of the following U.S. Patents: 5,947,436; 5,988,580; 6,010,110; 6,046,416; 6,210,117 and other patents pending.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. (15.9 kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly - Standard Ceiling Mount 1 2 Preparing for mounting Routing the wires □□ Route the wires exiting the top of the fan motor assembly (E) through the decorative motor collar cover (D) and then the center of the canopy bottom cover (EE). □□ Make sure the opening of the canopy (C) is on top and insert the ball/downrod (B) through the canopy (C). □□ Route the wires exiting the top of the fan motor assembly (E) through the downrod as shown.
Assembly - Hanging the Fan 1 2 Attaching the fan to the electrical box □□ Carefully lift the fan-motor assembly (E) up to the slide-on WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. 15.9 kg) or less”, and use screws provided with the outlet box. mounting bracket (A).
Assembly - Hanging the Fan (continued) 3 Setting the code on the remote control and receiver 2 4 3 4 YKO ZZ □□ Remove the remote control (L) battery cover by pressing □□ YKO 3 2 L ON 1 NOTE: The battery will weaken with age and should be replaced before leaking takes place as this will damage the hand unit. Dispose of used battery properly and keep the battery out of the reach of children. □□ ON 1 NOTE: The frequencies on your receiver and hand unit have been preset at the factory.
Assembly - Hanging the Fan (continued) 5 6 Wiring the receiver to the household wiring WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. Wiring the fan to the receiver NOTE: The fan comes with 12 in. lead wires for use with the provided 6 in. ball downrod assembly (B).
Assembly - Hanging the Fan (continued) 7 Mounting the fan-motor assembly (standard mount) A JJ □□ Align the locking slots of the canopy (C) with the two □□ □□ □□ screws (JJ) and alignment post (KK) in the mounting bracket (A). Push up the canopy (C) and turn clockwise until the alignment post (KK) engage to the round hole and the screws (JJ) engage to the key slots. Firmly tighten the two mounting screws (JJ).
Assembly - Attaching the Accessories 1 Installing the light kit pan □□ Remove one screw (LL) from the black bracket below the fan □□ □□ □□ motor assembly (E), and loosen but do not remove the other two screws. Push the light kit pan (H) up to the fan motor assembly (E) so that the two loosened screw heads fit into the keyhole slots. Turn the light kit pan (H) clockwise. Re-install the screw (LL) that was removed in the first step. Make sure all the screws are firmly tightened.
Operating Your Fan and Remote Control Remote Control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan. A. Warm weather YY Speed setting for warm or cool weather depends on factors such as the room size, ceiling height, number of fans and so on. The fan is shipped from the factory with the reversing switch (YY) positioned to circulate air downward.
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.