Installation Guide

13
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Hanging the Fan (continued)
Mounting the fan-motor assembly
(standard mount)
7
□ Align the locking slots of the canopy (C) with the two
screws (MM) and alignment post (RR) in the mounting
bracket (A).
□ Push up the canopy (C) and turn clockwise until the
alignment post (RR) engages to the round hole and the
screws (MM) engage to the key slots.
□ Firmly tighten the two mounting screws (MM).
□ Align the oval shape on the canopy (C) with canopy bottom
cover (HH). Push up the canopy bottom cover (HH) until
the screw (MM) heads engage to the slots on the canopy
bottom cover (HH) so that the magnetic canopy bottom
cover (HH) can be attached to the bottom of the canopy (C)
properly.
C
A
MM
HH
B
E
RR
□ Remove one screw (LL) from the silver colored bracket below the
fan motor assembly (E), and loosen but do not remove the other
two screws.
□ Push the light kit pan (J) up to the fan motor assembly (E) so that
the two loosened screw heads t into the keyhole slots. Turn the
light kit pan (J) clockwise.
□ Re-install the screw (LL) that was removed in the rst step.
□ Make sure all the screws are rmly tightened.
Installing the light kit pan
1
E
J
LL
Assembly - Attaching the Light Kit