Use and Care Guide

ManualsBrandsHome Decorators Collection ManualsElectronics60in Pontiac

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly - Hanging the Fan (continued)

Installing the receiver

□ Position the house supply wires to one side of the

slide-on mounting bracket (A); position the fan wires

to the opposite side.

□ Insert the narrow end of the receiver (I) (as shown, at

side towards the ceiling) into the slide-on mounting

bracket until it rests on top of the ball/downrod

assembly (B).

WARNING: To reduce the risk of re or electric shock,

remember to disconnect power. The electrical wiring

must meet all local and national electrical code

requirements. The electrical source and fan must

be 110/120 volts, 60Hz. Do not use this product in

conjunction with any variable wall control. Incorrect

wire connection can damage this receiver.

CAUTION: If other fan wires are a different color, have

this unit installed by a licensed electrician.

Wiring the receiver to the

household wiring

WARNING: To avoid possible electrical shock, turn

the electricity off at the main fuse box before

wiring. If you feel you do not have enough electrical

wiring knowledge or experience, contact a licensed

electrician.

WARNING: Each wire nut supplied with this fan is

designed to accept up to one 12-gauge house wire

and two wires from the fan. If you have larger than

12-gauge house wiring or more than one house wire to

connect to the fan wiring, consult an electrician for the

proper size wire nuts to use.

IMPORTANT: Use the wire connecting nuts (BB)

supplied with your fan. Secure the connectors with

electrical tape and ensure there are no loose strands or

connections.

□ Spread the wires apart so that the green and white wires

are on one side of the outlet box and the black wire is on the

other side.

□ Connect the green fan wires to the household ground wire

(this may be a green or bare wire) using a wire connecting

nut (BB).

□ Connect the receiver (I) black (or red) wire to the household

black (hot) wire using a wire connecting nut (BB).

□ Connect the receiver (I) white wire to the household white

wire (neutral) using a wire connecting nut (BB).

□ Secure each wire connecting nut using electrical tape.

Black

Green (or Bare)

Green

Outlet Box

Receiver

Antenna

White

Receiver (I)

BB (x3)

Green

BBB