HOME INV# 69117 SK18206A WHITAKER CORNER BENCH 20"Hx28"Wx20"D ASSEMBLY INSTRUCTIONS Made In China 1 /11
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts, which may have came loose inside the carton during shipment. Count all parts and material hardware, then compare with parts list to be sure all parts are present. If any parts are missing or damaged, please contact our Customer Service Department for efficient and speedy service. Please indicate the model number and code letter of part(s) needed.
NOTE:THE SURFACE WITH THE STICKER IS THE BACK SIDE 3 /11
FIG 1 ● INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE LEFT SIDE PANEL (D). ● JOIN THE LEFT SIDE PANEL (D) TO THE RIGHT SIDE PANEL (E) BY USING WOOD DOWEL (a) FIRST. ● TIGHTEN THE CAM LOCK BOLT (b) WITH THE CAM LOCK (c) FROM PRE-DRILLED HOLES. ● COVER THE CAM HOLES WITH PLASTIC COVER (d).
FIG 2 ● INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE FRONT PANEL (C). ● JOIN THE FRONT PANEL (C) TO THE LEFT SIDE PANEL (D) AND THE RIGHT SIDE PANEL (E) BY USING WOOD DOWEL (a) FIRST. ● TIGHTEN THE CAM LOCK BOLT (b) WITH THE CAM LOCK (c) FROM PRE-DRILLED HOLES. ● COVER THE CAM HOLES WITH PLASTIC COVER (d).
FIG 3 ● INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE BOTTOM PANEL (B). ● JOIN THE LEFT SIDE PANEL (D) THE RIGHT SIDE PANEL (E) AND THE FRONT PANEL (C) TO THE BOTTOM PANEL (B) BY USING WOOD DOWEL (a) FIRST. ● TIGHTEN THE CAM LOCK BOLT (b) WITH THE CAM LOCK (c) FROM PRE-DRILLED HOLES. ● COVER THE CAM HOLES WITH PLASTIC COVER (d).
FIG 4 ● INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE TOP PANEL (A). ● JOIN THE TOP PANEL (A) TO THE LEFT SIDE PANEL (D) THE RIGHT SIDE PANEL (E) AND THE FRONT PANEL (C) BY USING WOOD DOWEL (a) FIRST. ● TIGHTEN THE CAM LOCK BOLT (b) WITH THE CAM LOCK (c) FROM PRE-DRILLED HOLES. ● COVER THE CAM HOLES WITH PLASTIC COVER (d).
FIG 7 ● INSERT BASKET INTO THE ASSEMBLED PART.
