HDC#: 8188310220 MFG#: PKW-8159-0030 Please read over the instructions, it will be a time-saver in the long run.
1. Pull out all wires(White, Black, and Ground) out of junction box. 2. Unscrew Compression Nut(F) from Canopy (E) and slide Canopy (E) down cord, Then 3. 4. 5. 6. 7. 8. unscrew Finial Nut(D) from the Crossbar(A). and slide the Crossbar(A) to suitable place to ease installation of Crossbar (A) to junction box. Mount the Crossbar (A) to the junction box by using provided Mounting Screws (B) as shown in the picture. Using Wire Nuts (C) connect black wire from fixture to black wire from junction box.
