Instructions / Assembly

HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Use and Care Guide
Floating Wall Shelf
Installation
1
PREPARING FOR INSTALLATION
Place the backplate (B) against the
wall in the desired position.
While holding the backplate (B)
against the wall, use a level to ensure
that the backplate (B) is level.
Use a pencil to mark the backplate
(B) holes on the wall.
Ensure that arrow located on
backplate (B) is pointing up.
B
2
INSTALLING THE BACKPLATE
IMPORTANT: If you are drilling into
a stud, it is NOT necessary to pre-drill
the hole!
Using a power drill and a 9/32 in.
drill bit, drill holes into the wall at the
pencil marks.
Insert the drywall anchors (D) into the
holes.
Use a Phillips screwdriver and the
screws (C) to secure the backplate
(B) to the wall.
B
C
C
3
INSTALLING THE SHELF
Slide the shelf (A) onto the backplate
(B).
Align the holes on the bottom of the
shelf (A) with the holes on the bottom
of the tubes on the backplate (B).
Use the set screws (E) to secure
the shelf (A) to the backplate (B) by
inserting the set screws (E) through
the bottom of the shelf (A) and into
the backplate tubes.
B
A
E
E
TOOLS REQUIRED
Phillips screwdriver Power drill 9/32 in. drill bit
Level Pencil
PACKAGE CONTENTS
A
C
D
E
B
Part Description Quantity
A
Shelf 1
B
Backplate 1
C
Screw 6
D
Drywall anchor 4
E
Set screw 2
Item #
Model #
See page 2

Summary of content (2 pages)