Installation Guide

HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Use and Care Guide
Prole Floating Corner
Installation
1
PREPARING FOR INSTALLATION
□ Use the shelf as a guide and mark
with a pencil where the bracket (B)
should attach to the wall.
□ While holding the bracket (B) against
the wall, use a level to ensure that
the bracket (B) is level.
□ Use a pencil to mark the bracket (B)
holes on the wall.
□ Repeat same steps for
additional bracket (B).
B
A
2
INSTALLING THE BRACKET
IMPORTANT: If you are drilling into
a stud, it is NOT necessary to pre-drill
the hole!
□ Using a power drill and a 7/32 in.
drill bit, drill holes into the wall at
the pencil marks. Only in drywall
locations where there is not a stud.
□ Insert the drywall anchors (D) into the
holes.
□ Use a Phillips screwdriver and the
screws (C) to secure the bracket (B)
to the wall.
□ Repeat same steps for additional
bracket (B).
B
C
D
D
3
INSTALLING THE SHELF
□ Slide the shelf (A) onto the brackets
(B).
□ Use the set screws (E) to secure
the shelf (A) to the brackets (B) by
inserting the set screws (E) through
the top of the shelf (A) and into the
brackets (B).
□ Be sure to hold the screwdriver
vertical so the set screws (E) go in all
the way and become ush with the
top of the shelf (A).
B
A
E
E
B
TOOLS REQUIRED
Phillips screwdriver Power drill 7/32 in. drill bit
Level Pencil
PACKAGE CONTENTS
A
C
D
E
B
F
Part Description Quantity
A
Shelf 1
B
Bracket 2
C
Screw 4
D
Drywall anchor 4
E
Set screw 2
F
Sticker 2
Item #
Model #
See page 2
Template for easy installation
Screw Placement Template:
Using a push pin mount the template on the wall in the desired location, make sure that at
least one screw hole will be installed into a wall stud for best results.
Using a level, rotate the template until horizontal, then attach the template to the wall with
a second push pin.
Mark the screw indicator holes and remove the template.
Place the bracket over the holes marks and screw into place.