Instructions / Assembly

ANTI-TIP RESTRAINT ASSEMBLY INSTRUCTION
Anti-Tip Restraint Assembly is REQUIRED in order
to complete construction of this product.
When properly installed, this hardware can provide
protection against the unexpected tipping of furniture.
Warning:
With help, move cabinet into Position.
The Cabinet is Heavy. Lift with care.
Mark fixing holes on wall and remove Cabinet. Drill 6
mm holes and insert wall plug.
Before drilling check wall for hidden pipes and cables.
Reposition cabinet and fix wall strap using screw.
Anti-Tip Restraint Part List
Part Description
Part Image
Qty.
A
Nylon Strap
2
PC
B
Long Screw
4 PCS
C
Plastic Screw Anchor
4
PCS
D
Wall Brackets
4
PCS
E
Short Screw
4 PCS
Attach two mounting brackets "D" and secure to the
back top corners of the furniture using the short screws
"E". (As shown in fig. 1)
Mark the location on the wall for mounting the other two
brackets "D", Create the appropriate sized hole in the
wall and insert the plastic screws anchor "C". Secure the
bracket to the wall using the long screws "B". (As shown
in fig. 2)
Place the furniture so the bracket on the back edge of
unit is line with the bracket on the wall.Lace an end of
the nylon restraint strap "A" down
Lace an end of the nylon restraint strap "A" downthrough
each bracket. Bring both ends together and slide beaded
end of the strap through the keyhole slot on the other end.
Pull down on the beaded end until it snap-lock into the
keyhole. (As shown in fig. 3)
Check to make sure the strap is securely laced and
locked to the brackets.
Fig. 1
Fixing Bracket on Product
D
D
E E
E E
Back Side of the product
Fig. 2
Fixing Bracket on wall
Holes on wall
C
C
D B
B
Fig. 3
Wall
A
Product
CAC-2015