Installation Guide

HOME

DECORATORS

COLLECTION

Sedona Single Mirror

Assembly

Instructions

ITEM#: 9966100270 MFG#: MD-M28-SD

Please read over the instructions; it will be a time-saver in the long run.

Note: before assembly, please be sure to work on a soft flat surface to

avoid any damage to the finish.

Page 1 of 2

PAGE 1
HOME DECORATORS COLLECTION Sedona Single Mirror Assembly Instructions ITEM#: 9966100270 MFG#: MD-M28-SD Please read over the instructions; it will be a time-saver in the long run. Note: before assembly, please be sure to work on a soft flat surface to avoid any damage to the finish.
PAGE 2
Hardware Check List Please take all the hardware listed below out of the hardware bag. A Plastic Anchor – 2pcs Step Step Step Step B Screw – 2pcs 1. Drill two holes in the desired location on the wall. 2. Press the plastic anchor (A) into the hole. 3. Secure the screw (B) into wall anchor (A). 4. Hang the mirror on the screw as shown.