Product Specification Guide A0113
Limited Lifetime Warranty Home Decorators Collection (warrantor) warrants to the original consumer purchaser only, that all products manufactured or supplied by warrantor will be free from defects in material and workmanship. This warranty is for your lifetime as long as you own the cabinetry, on product used for Residential Purposes only and is not transferable to subsequent owners. Proof of Purchase is required.
Table of Contents Standard Overlay Door Styles........................................................... 2 Standard Overlay Cabinet Construction............................................ 3 Full Overlay Door Styles.................................................................4-5 Full Overlay Cabinet Construction..................................................... 6 Cabinet Customization Options......................................................... 7 Wall Cabinets & Accessories......................
Standard Overlay Door Styles Huntington Chocolate Glaze (HCG) Weston Light Oak (WLO) - 3/4" thick, standard overlay solid hardwood frame wall and base doors with solid hardwood square raised center panels and 3/4" wide applied picture frame molding - 3/4" thick, standard overlay solid hardwood frame wall and base doors with solid oak square raised center panels - 3/4" thick, standard overlay solid hardwood frame drawer fronts with solid hardwood square raised center panels and 3/4" wide applied picture
Standard Overlay Construction Details 4 5 2 10 3 1 INTERIOR Light maple print laminated to 1/2" thick plywood provides sanitary, wipe clean finish 2 FACE FRAME 3/4" thick solid hardwood doweled and joint glued 3 END PANELS 1/2" thick plywood with light maple print laminated interior and raw veneer exterior. EXPOSED SIDES REQUIRE FINISHED END PANELS.
Full Overlay Door Styles Hallmark Arctic White (HAW) Lyndhurst Cabernet (LCB) - 3/4" thick, full overlay solid MDF raised panel vinyl clad wall and base doors - 3/4" thick, “pillow top” full overlay solid hardwood miter 2¾" frame wall and base doors with solid hardwood square raised center panels - 3/4" thick, full overlay solid MDF raised panel vinyl clad drawer fronts - Available in Arctic White Vinyl - 3/4" thick, “pillow top” full overlay solid hardwood miter 2¾" frame drawer fronts with solid hard
Full Overlay Door Styles (cont.
Full Overlay Construction Details 4 5 2 10 3 1 7 9 1 INTERIOR Light maple print laminated to 1/2" thick plywood provides sanitary, wipe clean finish 2 FACE FRAME 3/4" thick solid hardwood doweled and joint glued 3 END PANELS 4 FLOOR & CEILING 1/2" thick plywood with light maple print laminated both sides captured by end panels 5 BACK PANELS 1/2" thick plywood with light maple print laminated one side captured by end panels 6 “I-BEAM” SUPPORTS 1/2" thick plywood, full depth braces prov
Customization Options FACTORY FINISHED ENDS - Cabinets are manufactured with unfinished wood veneer exterior finish. Exposed sides, visible once installation is complete, require a color matched end panel.
Wall Cabinets 15" High Double Door WALL CABINET CODING STANDARD REFRIGERATOR W 30 30 W 36 24 18 Cabinet Cabinet Cabinet Code Width Height Cabinet Cabinet Cabinet Cabinet Code Width Depth Height SPECIAL NOTES: · Standard wall cabinets are 12" deep. Refrigerator wall cabinets are 24" deep.
Wall Cabinets 18" High x 24" Deep Double Door " 30",36 CUSTOM 30" High Single Door DEPTH DEPTH SPECIFY RIGHT or LEFT HINGED W302418 W362418 W0930 *W1230 *W1530 *W1830 W2130 18" 24" - No shelf - Must be installed between two cabinets, cabinet and wall, or supported by refrigerator panels (RP) • CUSTOM DEPTH: 16" to 23" deep 24" High Double Door CUSTOM - Two adjustable shelves Mullion doors available in select styles. Consult availability guide on page 13.
Wall Cabinets CUSTOM 30" High Double Door ", 30", " 33", 36 24", 27 30" DEPTH 30" High Wall Angle Wall Corner *W2430 W2730 *W3030 W3330 *W3630 20" SPECIFY RIGHT or LEFT HINGED 12" - Two adjustable shelves Mullion doors available in select styles. Consult availability guide on page 13. • CUSTOM DEPTH: 5" to 15" deep * 36" High Double Door CUSTOM 20" *WA2430 - Two adjustable shelves Mullion doors available in select styles. Consult availability guide on page 13.
Wall Cabinets 36" and 42" High x 15" Deep Wall Angle 42" High Wall Blind Corner DEPTH 23" 27" 27" CUSTOM 24" Wall Corner SPECIFY RIGHT or LEFT BLIND 15" 23" WBCU2742 42" 36" or 42" SPECIFY RIGHT or LEFT HINGED 15" 15" 15" *WA271536 *WA271542 - Three adjustable shelves Mullion doors available in select styles. Consult availability guide on page 13.
Wall Cabinets WRHC36A 9.69" WRX3018 " 31 able mm Tri 19.32" 10.84" 38.31" " .88 24 - Matching interior and exterior standard - 3/4" thick solid wood “X” shelf - Must be installed between two cabinets or cabinet and wall 20.
Wall Cabinets Fluted Fillers 15" Wide Wall Skin WSK1536 FF330 WSK1542 36",42" FF336 FF342 - 3/4" thick solid wood Face and all edges finished May be trimmed 1/2" each side 30" Available in Standard & Full Overlay (except HAW) door styles - 36" available in Full Overlay (except HAW) door styles only - 42" Available in Standard & Full Overlay (except HAW) door styles 14¼" - Angle Fluted Fillers 3/16" thick plywood matching exterior Field modified and installed Available in all finishes AW is vinyl f
Wall Cabinets Matching Wall End Panels Cabinet Fronts Only (CFO) MWEP30 MWEP36 MWEP42 Most Wall cabinets can be ordered as “Cabinet Fronts Only”. Face frame, doors, hinges and bumpers will be supplied and shipped loose. Please consult CFO availability guide on page 33. Soft Close Door (SCD) option not available for CFOs.
Wall Cabinets Mullion Door A B A MD1230 MD1530 MD1830 MD2430WD MD1236 MD1536 MD1836 A MD1242 MD1542 MD1842 MD2442WD A A A B B A A A C A A C C MULLION DOOR SPECIFICATION, AVAILABILITY & USAGE GUIDE SKU STANDARD OVERLAY # OF LITES DIMENSIONS (inches) A B C FULL OVERLAY # OF LITES DIMENSIONS (inches) A B C MD1230 MD1230 MD1530 MD1530 MD1530 MD1830 MD1830 MD2430WD MD1236 MD1236 MD1536 MD1536 MD1536 MD1836 MD1836 6 N/A 6 6 N/A 6 6 6 N/A N/A N/A N/A N/A N/A N/A 7-1/2 N/A 7-1/2 7-1/2 N/A 7
Base Cabinets 24" Deep Double Door BASE CABINET CODING CUSTOM DEPTH " 33", 36 B 30 - 2T B33 Cabinet Code Cabinet Width Customization (2ROTS) B36 SPECIAL NOTES: · Standard Base Cabinets are 24" deep and 34½" high · Desk Height base cabinets are 21" deep and 28½" high · Add door thickness for total cabinet depth · Products are available in all door styles unless stated otherwise · Standard cabinet exterior is unfinished veneer, exposed sides require Finished Ends or Matching End Panels · Sp
Base Cabinets 24" Deep Double Door with 1 Roll-Out Tray 24" Deep Double Door with 2 Roll-Out Trays " 33", 36 " 33", 36 B33-1T B36-2T B36-1T - One full depth adjustable shelf - One adjustable, full width roll-out tray - Available in Full Overlay door styles only 24" Deep Single Door with 2 Roll-Out Trays 1" ", 18", 2 12", 15 - Two adjustable, full width roll-out trays - Available in Full Overlay door styles only 24" Deep Single Full Height Door SPECIFY RIGHT or LEFT HINGED ", 21" 15", 1
Base Cabinets 24" Deep Base Single Wastebasket " 15", 18 34 B1WB15 B1WB18 NE 24" Deep Base - 4 Drawers W 36" CUSTOM DEPTH 1 2" BD36 34½" 24" - Basket slides on heavy duty, full extension runners - 35 quart capacity plastic basket is secured by epoxy coated white wire “cage” - White basket is removable - Basket dimensions: 14"W x 10"D x 18"H - Top mount roll-out tray for trash bag storage 24" Deep Base Double Wastebasket " 18", 21 24" - Two standard top drawers - Two deep drawers • CUSTO
Base Cabinets Blind Base Corner Installation 24" Deep Sink Base Top View A C CUSTOM DEPTH ", 30" 24", 27 SB24 SB27 SB30 Blind Base Cabinet 3" Filler Adjacent Base Cabinet • 24" Deep Blind Base Corner CUSTOM No t shelf, false drawer front also be used as drop-in cooktop base " CUSTOM DEPTH: 9" to 23" deep hMay "C 24" Deep Sink Base DEPTH 30" CUSTOM DEPTH " 33", 36 SPECIFY RIGHT or LEFT BLIND SB33 SB36 BBCU39 Blind Closure Panel • Indicate R or L for blind side (right shown) Cabinet ca
Base Cabinets 24" Deep Base Pantry Pullout 9", 12" NE W 24" Deep Base Cooktop - Single False Front 30" BCT30 BPPO9 BPPO12 24½" 34½" 24" 24" - Available in 9" & 12" width cabinets - Full extension ball bearing slides provide stable, smooth pullout function - Adjustable shelves with chrome rails - Available in Full Overlay doorstyles only (except HAW) 24" Deep Filler Pantry Pullout 3", 6" - False top drawer front - Two deep drawers - Accepts drop-in cooktop NE W 24" Deep Base Cooktop - Double
Base Cabinets 21" Deep Desk Knee Drawer Filler Strips 3" 4 21" FS30 DKD30 FS630 30" - One full width pencil/cosmetic drawer - Knee drawer is designed for use between two desk base cabinets - Comfortable height for dressing table or writing surface when installed at 28½" height with 1½" thick countertop - Slab drawer front all door styles - Standard Overlay may be trimmed up to 2" on each side - Full Overlay may be trimmed up to 1" on each side - FULL EXTENSION RUNNER NOT AVAILABLE 21" Deep Desk Draw
Base Cabinets 24" Deep End Panel with Filler Base Skin 24" BSK345 BEP1.
Base Cabinets Rollout Tray Kits " ",18 12",15 3", 36" , 30", 3 ",27" ,21",24 5" 20" - 5/8" solid wood dovetail construction - Consult availability guide idth = elf W 1 3/4" h S d – he Finis et Width Cabin 227/8" - 3/4" thick laminated matching cabinet interior Edgebanded on front edge One shelf and four clips per kit Consult availability guide SHELF KIT AVAILABILITY GUIDE ROLL-OUT TRAY KIT AVAILABILITY GUIDE SKU STANDARD OVERLAY FULL OVERLAY DESIGNED TO FIT DESIGNED TO FIT SK1224 SK1524 SK1
Base Cabinets Full Extension Drawer Runner (FX) Cutlery Divider Tray CDT15 CDT18 CDT21 CDT24 4" ", 21",2 15", 18 34 12 " - Available in all Standard & Full Overlay 21" depth (except DKD30) and 24" depth cabinets with drawers - Smooth ball bearing, 75 pound load capacity full extension concealed runner with shock that engages when drawer is 1" from closing and applies resistance for soft closing - Not available for roll-out trays Soft Close Door (SCD) - Available in Standard & Full Overlay door style
Base Cabinets NE Tray Dividers W Touch-Up Kit TD12CR TD18CR 12", 18" - Available in 12" & 18" heights - Chrome finish - Stores baking sheets, serving dishes, etc.
Tall Cabinets CUSTOM 24" Deep Two Door Utility TALL CABINET CODING DEPTH 18" U 24 24 84 SPECIFY RIGHT or LEFT HINGED U182496 42" Cabinet Cabinet Cabinet Cabinet Code Width Depth Height - One fixed and five adjustable shelves - Optional rollout trays or additional shelves available - Loose toe kick box for ease of installation • CUSTOM DEPTH: 9" to 23" deep 96" SPECIAL NOTES: · Standard Tall Cabinets are 24" deep · Add door thickness for total cabinet depth · Products are available in all door
Tall Cabinets 24" Deep Four Butt Door Utility CUSTOM DEPTH 24" Deep Two Door Utility with Four Rollout Trays U242496 24" SPECIFY RIGHT or LEFT HINGED 18" U182496-4T 42" Exposed sides require TSK96 42" - One fixed and five adjustable shelves - Optional rollout trays or additional shelves available - Loose toe kick box for ease of installation • CUSTOM DEPTH: 9" to 23" deep 96" - Four adjustable, full width rollout trays - Two adjustable shelves - Loose toe kick box for ease of installation 96"
Tall Cabinets 24" Deep Four Butt Door Utility with Four Rollout Trays 24" Deep Universal Oven 33" OC332496U 24" U242496-4T - Consult chart for oven cutout dimensions - One adjustable shelf - 3 field removable drawers - 3" stiles in oven compartment - Loose toe kick box for ease of installation 30" Exposed sides require TSK96 42" 96" 96" - Four adjustable, full width rollout trays - Two adjustable shelves - Loose toe kick box for ease of installation CABINET 24" OC332496U 24" Deep Universal Ov
Tall Cabinets Shelf Kits Tall Filler Strips ¾" SK1824 SK2424 SK3324 = Width Shelf – 1 3/4" d e h Finis et Width Cabin FS84 FS90 84" 90" 96" 227/8" FS96 FS696 6" - 3/4" thick laminated matching cabinet interior - Edgebanded on front edge - One shelf and four clips per kit 3", - 3/4" thick solid wood - Face and all edges finished - FS84, FS96 & FS696 available in Standard & Full overlay door styles - FS90 available in Full overlay door styles only Fluted Fillers 24" Deep Refrigerator Panel with 1½
Tall Cabinets Tall V-Groove Skin Factory Finished End Panels 96" TSK84 L or R TSK90 L or R TVGSK96 - Matching exterior - Factory installed 231/4" - - Specify Applied Left or Applied Right 3/16" thick wood veneer v-groove exterior Grooves spaced 1¼" on center Field modified and installed Available in Standard (except WLO & VHS) & Full Overlay (except HAW) door styles Matching Toe Kick 8' - Available in all finishes - AW is vinyl faced, HS and LO are print laminate, all others are veneer faced Cabi
Vanity Base Cabinets VANITY CABINET CODING 21" Deep Double Door VSB 30 21 Cabinet Code Cabinet Width 36" • Order B36 • Select 9" to 23" depth · Custom Depths are available where indicated. Use Standard Base Cabinet coding to order as specified. · Products are available in all door styles unless stated otherwise · Specification drawings depict Full Overlay products. Standard Overlay styles feature a center stile in cabinets 30" and wider.
Vanity Base Cabinets 21" Deep Single Full Height Door SPECIFY RIGHT or LEFT HINGED CUSTOM Factory Finished End Panels DEPTH ", 18" 12", 15 VBSK345 L or R Std.
Vanity Wall Cabinets 21" Deep Two Door Linen SPECIFY RIGHT or LEFT HINGED CUSTOM DEPTH 18" 30" 12" High x 12" Deep Wall Double Door CUSTOM DEPTH W3012 W3612 Std. 21" Depth VLC182184 Custom Depths 84" • Order U182484 • Select 9" to 23" depth - No shelf • CUSTOM DEPTH: 5" to 15" deep 21" - One fixed and four adjustable shelves 21" Deep Four Door Linen CUSTOM 15" High Wall Double Door DEPTH 24" 30" DEPTH W3015 W3315 W3615 Std.
Vanity Wall Cabinets 30" High Wall Single Door CUSTOM DEPTH 30" High Wall Angle Wall Corner 20" SPECIFY RIGHT or LEFT HINGED W0930 *W1230 *W1530 *W1830 W2130 - Two adjustable shelves Mullion doors available in select styles. Consult availability guide on page 13. • CUSTOM DEPTH: 5" to 15" deep * 30" High Wall Double Door ", 30", 24", 27 " 33", 36 30" CUSTOM DEPTH 20" SPECIFY RIGHT or LEFT HINGED *WA2430 - Two adjustable shelves Mullion doors available in select styles.
Vanity Cabinets Base V-Groove Skins Angle Fluted Fillers 3" 4 1" 12 45º AFF330 BVGSK345 TVGSK96 34½" 96" 30" 3" 135º 3" 1" 12 41/4" 23¼" - 3/16" thick wood veneer v-groove exterior Grooves spaced 1¼" on center Field cut to 20¼" depth Available in Standard (except WLO & VHS) & Full Overlay (except HAW) door styles Angle Fillers Fluted Fillers 3" 4 3" 4 1" 12 AF330 30" 45º 3" - 3/4" thick solid wood - Face and all edges finished - Available in all finishes 30" 84" 1" 12 - 3/4"
Molding Furniture Valance ¾" FV48 Scribe Molding SM8 48" 5½" ¾" 51/8" - 3/4" thick solid wood - May be trimmed 3" on each end - Available in Standard (except WLO & VHS) & Full Overlay door styles Valance - 1/4" thick solid wood - Available in Standard & Full Overlay door styles VA48 ¾" 48" ¼" 8' 5½" BM8 Batten Molding 8' 3" ¼" ¾" - 3/4" thick solid wood - May be trimmed on each end - Available in Standard & Full Overlay door styles Inside Corner Molding - 1/4" thick solid wood - Availa
Molding Angle Crown Molding ACM8 8' Top Molding Mounting Strip TMMS8 8' 25/8" Mounting Strip ¾" 17/8" 1 /16" - 3/4" thick wood core, veneer wrapped - Use with TMMS8 for top of cabinet installation - Available in FMG, HCN, KCB, LCB, LCN, RMG, NPW & WCN door styles only Molding 3 CLR8 Classic Light Rail ¾" 1 /16" - 3/4" thick wood core - Available in Standard & Full Overlay door styles 3 Spindle SPL 8' 34½" 2¼" 3½" D 3½" W Top View - 3/4" thick solid wood ¾" - Available in Standard (exc
Decorative Hardware DH43-114 - DH43-628 - Backplate for DH43632 or DH43-614 - Oiled bronze - 3-3/4" center - 5-1/4" outside length Traditional pull Antique silver 3-3/4" center 4-1/2" outside length DH43-124 - Elongated oval knob - Oiled bronze DH43-614 Traditional pull Oiled bronze 3-3/4" center 4-1/2" outside length - - Classic pull Antique pewter 3-3/4" center 4-3/4" outside length DH45-100 Classic pull Oiled bronze 3-3/4" center 4-3/4" outside length - - DH43-624 Screw-head cup pull Ant
Decorative Hardware DH65-120 - Birdcage pull Antique iron 3-3/4" center 4-1/2" outside length - DH88-104 - Birdcage knob - Antique iron - 2-1/2" diameter DH65-432 - Birdcage knob - Stainless steel DH87-102 - Square dimpled knob - Matte nickel DH88-110 - DH99-128 Arrowhead pull Antique pewter 5" center 7-1/2" outside length - DH93-112 - Contemporary bow pull Brushed nickel 3-3/4" center 5-1/2" outside length DH99-188 Raised mitered pull Antique pewter 5" center 6-3/8" outside length DH93-
Cabinet Frame & Opening Dimensions NOTE: ALL DRAWINGS DEPICT FULL OVERLAY PRODUCT. STANDARD OVERLAY WILL HAVE A 3" CENTER STILE IN ALL DOUBLE DOOR CABINETS 30" AND WIDER.
Cabinet Frame & Opening Dimensions 21",24",27",30",or 33" 1 1/2" 131/2",15" 3" 131/2",15" 1 1/ 2" 6" 341/2" Double Door Base 2" 19" 1 1/ 2" 4 1/ 2 " 24",27",30",33",36" NOTE: B27, B30 have full width drawers DRAWER BOX INSIDE DIMENSIONS SHALLOW DRAWER CABINET HEIGHT DEPTH WIDTH B12, BD12 VB1221, VBD1221 B15, BBCU42, BD15 VB1521, VBD1521 DDO15, DDR15 B18, BD18 VB1821, VBD1821 B21 B24, BD24 VB2421 B27 B30, BD30 VB3021 B33 B36, BD36 VB3621 OC332484U, OC332490U, OC332496U 4-3/8" 4-3/8" 4-3/8" 4-
Cabinet Frame & Opening Dimensions NOTE: 96" TALL CABINETS TO BE SUPPLIED WITH LOOSE TOE KICK BOX (EXPOSED SIDES REQUIRE TSK96) 42
Cabinet Fronts Only - Availability Guide STANDARD OVERLAY FULL OVERLAY CABINET WLO VHS HCG HAW HCN FRONT WCN HBG KCB ONLY SKU FMG FOR NPW W0930 W0936 W0942 W1230 W1236 W1242 W1530 W1536 W1542 W1830 W1836 W1842 W2130 W2136 W2142 W2430 W2436 W2442 W2730 W2736 W2742 W3012 W3015 W3018 W3024 W3030 W3036 W3042 W3315 W3330 W3336 W3342 W3612 W3615 W3618 W3624 W3630 W3636 W3642 B12 B15 B18 B21 B24 B27 B30 B33 B36 U1884 U1890 U1896 U2484 U2490 U2496 CFOW0930 CFOW0936 CFOW0942 CFOW1230 CFOW1236 C
Notes: 44
A0113
