Use and Care Manual

2
Hanging the fan to the wall
mounting bracket
3
□ Remove the stopper (II) by pressing the clip on the
stopper (II) and sliding it forward off of the tube and
fan assembly.
8
Assembly — Hanging the Fan
BB
A
B
GG
HH
II
A
□ Remove the thumb screw (BB) at the base of the fan
assembly (A).
□ Grab the fan assembly (A) rmly with two hands.
Align the four slots (HH) in the back of the base with
the four hooks (GG) on the wall mounting bracket (B),
and then place the fan assembly (A) rmly on the wall
mounting bracket.
□ Secure the base to the wall mounting bracket with
thumb screw (BB) previously removed.
WARNING: Ensure the four slots in the back of the base
are completely engaged with four hooks (GG) on the mounting
bracket (B), and the fan assembly (A) sits securely on the
mounting bracket (B), or else the fan may fall and result in
injury or death.
Removing the stopper from
the fan assembly
NOTE: The stopper (II) must be removed before operating
your fan.