Instructions / Assembly

Assembly — Installing the Light Kit (continued)

Installing the fan without the

light kit (optional)

□ Reomve the decorative cover mounting plate (MM)

from the decorative cover by removing the three

decorative cover screws (UU) and keep these screws.

□ Remove one of the three light kit mounting plate

screws (JJ) from the mounting ring (TT) and loosen

the other two screws. (Do not remove.)

□ Place the key holes in the decorative cover mounting

plate (MM) over the two screws (JJ) previously

loosened from the mounting ring (TT). Turn the

decorative cover mounting plate (MM) until the

decorative cover mounting plate (MM) locks in place

at the narrow section of the key holes.

□ Securely tighten the two light kit mounting plate

screws (JJ) previously loosened and the one (JJ)

previously removed.

□ Attach the decorative cover (NN) to the decorative

cover mounting plate (MM) using the three decorative

cover screws (UU) provided. Be sure to tighten all

screws.